Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 4/7/2006 6:44:37 AM EST
Im probably going to buy some type of weapon mount for my PVS 14 I just purchased from Victor. While Im on the subject it is a perfect tube and Victor was awesome.

Back on topic, I am leaning toward Larue mounts. Ive alredy got an Eotech (AA model) mounted to my A4 upper. If I got the LT-110 Eotech mount would I need to get the Larue LOW or HIGH mount ring? Since the LT110 has the raised section of rail behind the EOtech will a LOW still clear my BUIS (its a Midwest Industries if that helps)?

Also, would anyone recommend another mount such as GG&G, ARMS etc? I definitely need some sort of riser to get my Eotech moved forward a little so I have room to mount the PVS 14.
Link Posted: 4/7/2006 9:34:09 AM EST
[Last Edit: 4/13/2006 4:37:13 PM EST by Victor]
Link Posted: 4/8/2006 6:19:58 AM EST
[Last Edit: 4/8/2006 6:20:48 AM EST by dfowler21]
Well I did find a pic of one of the Larue mounts on the EE. Looks like the Low PVS 14 mount would probably work out with this particular Eotech mount. The pic is from mstn.biz

Link Posted: 4/12/2006 8:23:01 AM EST
I like the PRI. About the only downside is that it mounts to the same location as the J-mount, so one must be removed to use the other.
Link Posted: 4/12/2006 11:44:24 AM EST
I decided to go with the Larue mounts. I got my PVS ring today, but Im still awaiting my Eotech riser. I can say the ring is a nice looking piece, mounts rock solid to the rail, and securely holds the PVS.
Link Posted: 4/12/2006 12:14:18 PM EST

Originally Posted By murderman:
I like the PRI. About the only downside is that it mounts to the same location as the J-mount, so one must be removed to use the other.

yeah an easy solution is to simply buy two PVS 14s... or better yet a set of goggles...

Ok I will shut up now.

Link Posted: 4/13/2006 5:10:01 AM EST
Yeah, maybe I can just tell my wife that the second set is for her to use.
Link Posted: 4/13/2006 12:01:23 PM EST
I really like the PRI mount, and the fact that it's adjustable means it is compatible with any other gear. It is expensive, and unlike the LaRue Tactical mount you can't leave the helmet mount arm attached to it.

You decision depends also on what other mounts you use. I use the ARMS/Cantilever mount on the Aimpoint and a SAMSON Flip Mount for a 3X Magnifier in place of the PVS-14 for day use.
And if the ARMS throw levers ever loosen up I can replace them with LT 17 & 17S replacement bases if I elect not to send them back to ARMS.

However, I really like the GG&G setup also, as you can easily switch the 3X and the PVS-14 on and off the same base.
And the LT mounts for both the Aimpoint/PVS-14 are also superb.

It seems, for tactical use, a SAMSON Flip Mount for the PVS-14 would also be valuable as it is for the 3X magnifier. For instance, transitioning from dark outside to illuminated inside.

Of course, if you get an IR laser, this is all immaterial as then the helmet mount is the way to go, but I still like the option of mounting the PVS-14 on the weapon or weapons.

Top Top