Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
11/20/2019 5:07:11 PM
Posted: 8/16/2009 7:56:52 AM EST
Anyone tried a 40 round HK93 mag in their V93 or HK93 or C93 with any problems? I tried a steel 30 round mag with no problems. Yet, trying a 40 round mag failed to allow the cocking lever/bolt carrier to slam home when slap-released. I tried it several times, just didn't work. After a few more tries and starting with the cocking lever full forward and then inserting a new mag, it finally loaded the first round and worked fine from that point on. I only had 20 rounds loaded so wasn't a tight mag. Mags were like new. Rifle functioned perfectly however.
Link Posted: 8/21/2009 1:00:01 PM EST
It has to be the mag. I built a 93 on a vector reciever and have 6 40 round mags and all work flawless.
Link Posted: 8/21/2009 3:54:38 PM EST
Originally Posted By DrJekyll:
It has to be the mag. I built a 93 on a vector reciever and have 6 40 round mags and all work flawless.


+1. I have an HK93 and a Vector V53 and 40 round mags fit and function in both guns flawlessly.

Link Posted: 8/24/2009 6:09:07 AM EST
40 rd mags are gtg in my Vector V93
Link Posted: 10/31/2009 2:19:48 PM EST
+1 on mag
Link Posted: 10/31/2009 2:46:54 PM EST
My 40 rounders work fine in my V93
Link Posted: 10/31/2009 4:44:06 PM EST
I've had a similar problem with my V53 pistol. The gun came with one 40 rd aluminum mag. it would not strip and chamber the first rd out of the mag even if I loaded only 8 to 10 rounds in the thing.

I applied white lithium grease to the rails (which are round not square BTW) and took it out again.

Function improved and it now strips & feeds with 20 to 30 rounds loaded in the mag. I don't think I've stuffed it full with all 40 yet.

My gun, purchased new, did not arrive with the grease on the carrier & rails as the other Vectors I've seen.
Link Posted: 10/31/2009 7:05:01 PM EST
One of my 40 rds locks in , but the other mag doesn't. I haven't cleaned the gun yet so I am hoping it works later on. I always heard stories about how dirty CIA guns were, mine is absolutely filthy.
Link Posted: 11/1/2009 7:14:44 PM EST
My V93 works fine with 7 40 rounders, 3 25 rounders and 3 30 rounders.
The rails are round, and I did have to tweak the extractor spring after about 150 rounds ( was getting FTE's )

the bore guide I make, now feature slots that a flat bottomed ;-), so the fit Vectors AND original HK's.

No one else on the planet makes a 93 bore guide.

35.00 delivered skered53@yahoo.com

Help an un-employed Jarhear out.
Link Posted: 11/2/2009 3:37:21 PM EST
I was just at the range yesterday with my C93 and 40 rnd. mags. I was only loading about 15 rnds. in each but they worked just fine.
Top Top