Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 10/4/2014 6:03:04 PM EST
[Last Edit: 10/4/2014 6:06:04 PM EST by nmleo431]
I own a semi auto UZI SBR 9mm and a Tirant 45s can
my question is if I have the 9mm piston and a threaded barrel
1/2x28 will this combination work well together?

Thanks in advance for the help/info
Link Posted: 10/4/2014 6:52:59 PM EST
Don't forget the fixed barrel spacer.
Link Posted: 10/4/2014 7:58:30 PM EST
You need the fixed barrel spacer to replace the piston...you don't want to ruin your piston.
Link Posted: 10/4/2014 8:09:22 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By FAL:
You need the fixed barrel spacer to replace the piston...you don't want to ruin your piston.
View Quote


It doesn't replace the piston. The piston is what threads on to the barrel. It just stops the nielsen device from moving.
Link Posted: 10/5/2014 10:19:18 AM EST
Thank you Gentlemen,
I will order a fixed barrel spacer from AAC on Monday Morning.
Folks on this site are the best!!!
Link Posted: 10/5/2014 7:32:48 PM EST
People have mentioned the spacer, piston, etc. But I'll add to it that it's a great idea. I've found the Uzi suppresses very well. It's also still reasonably compact with the can in place. Get your barrel threaded and don't look back.
Link Posted: 10/5/2014 9:40:14 PM EST
I have this exact setup...nice little package. However, I just had the Uzi threaded .578 x 28 so I didn't have to keep swaping the piston out....there was plenty of meat on the barrel so it was an easy option.

ZY
Link Posted: 10/6/2014 4:51:53 PM EST
Get ready to launch some brass though
Top Top