Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/25/2005 7:21:54 PM EST
Link Posted: 12/25/2005 8:33:51 PM EST
[Last Edit: 12/26/2005 7:31:00 AM EST by Dano523]
Don't waste money on the drop in triggers for the Rugers; they still need to be fitted to get the most out of them.

Instead just have him take the rifle down to a smith to have the stock trigger worked over. I have no problems setting them up at 2lbs clean break with no creep, and neither should your local smith. Cost averages around $50 so have him check around and get references to the smiths work before letting him loose on the rifle (read he screw it up and you need a new trigger, ruger is going to make you send the whole rifle in to get a new trigger, and it will be set back at the factory 6lb break point*).

* Do not send in a rifle to Ruger with any after market parts in place of the factory parts. The after market pulls will be pulled, replaced with factory parts, and you don't get the old parts back.

Link Posted: 12/25/2005 11:31:51 PM EST
tag for my .30-06
Link Posted: 12/26/2005 1:27:00 AM EST
[Last Edit: 12/26/2005 1:38:04 AM EST by raf]
Top Top