Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 10/31/2013 3:01:23 PM EST
[Last Edit: 12/11/2013 4:48:58 PM EST by snaggletooth1925]
Anyone know of one similar to the ones that are made for Peltors? Iv heard these can be modified to work with Sodins but cant find any details


Also from what I can find this is what MSA has to mount to a helmet.


This is the only thing I can find but its airsoft


Update: Ordered a set of the Airsoft Sordin Adapters. Obviously they arent the best made but I have never had my hands on a real set of the 3m ARC rail adapters. I think they will hold up well under normal use. On the left side the pressure is a little light but with alittle adjustment it seals up good. Not bad for $22 but damn I wish 3m would make a set for sordins.



The S.A.R.A Gen 2 installation video. Ordered a set IIl post when I get them installed.


Update 11/12
Installed the SARA's on my REAL 3M adapters. The pressure the real adapters place on the headset is increased a lot. Not to the point of being uncomfortable but enough for a good seal.

The only complaints I have( Which are very minor) about the SARA's was that the pliers that they came with sucked. And that the screws for the SARAs used a different bit then is needed to remove the internals. Like I said very minor. I mentioned this to the designer and he said hes working on a fix for both.

Cant wait to hit the range with these. Glad someone finally made them!

Here are the REAL 3M adapters

Here are the AIRSOFT adapters

Installed SARAs


Link Posted: 10/31/2013 3:46:39 PM EST
Link Posted: 10/31/2013 7:47:05 PM EST
There is a quote here that theres a guy making on of these but I cannot find any contact info for him. Its called the Sordin Arc Rail Adapter (S.A.R.A)
Link Posted: 11/1/2013 4:27:08 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By snaggletooth1925:
There is a quote here that theres a guy making on of these but I cannot find any contact info for him. Its called the Sordin Arc Rail Adapter (S.A.R.A)
View Quote


I know him personally and gave him a heads up about the interest. I will post what I hear back.
Link Posted: 11/1/2013 8:29:33 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By billpete:


I know him personally and gave him a heads up about the interest. I will post what I hear back.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By billpete:
Originally Posted By snaggletooth1925:
There is a quote here that theres a guy making on of these but I cannot find any contact info for him. Its called the Sordin Arc Rail Adapter (S.A.R.A)


I know him personally and gave him a heads up about the interest. I will post what I hear back.

Cool thanks. Ready to order ASAP. If he is ok with it could you PM me his email.
Link Posted: 11/19/2013 2:03:42 PM EST
Update bump
Link Posted: 11/19/2013 4:33:35 PM EST
How does the plastic feel? With the Asian made airsoft its a crapshoot if you get some extremely cheap cast resin absolute junk, some polystyrene (model kit) plastic, or low grade nylon instead of the original spec glass filled nylon, zytel, etc.
Link Posted: 11/20/2013 7:16:21 AM EST
I hit up the guy on Monday, and he had some personal issues going on the past week or so.

Has the website ready to go, just waiting on final quotes.
Link Posted: 11/21/2013 5:09:55 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By stoner63a:
How does the plastic feel? With the Asian made airsoft its a crapshoot if you get some extremely cheap cast resin absolute junk, some polystyrene (model kit) plastic, or low grade nylon instead of the original spec glass filled nylon, zytel, etc.
View Quote


Seems like the plastics is decently strong. I haven't noticed any really bad flexing when appling outward pressure.

If I get a chance today I'll put up pictures of the inside of the mount.
Link Posted: 11/27/2013 6:25:49 AM EST
Ok, I found his website and it is up and running.

SARA Set

Disclaimer: no financial interest.

Good luck guys, I hope that this helps you out with some mounting solutions.
Link Posted: 11/27/2013 6:32:10 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By snaggletooth1925:


Seems like the plastics is decently strong. I haven't noticed any really bad flexing when appling outward pressure.

If I get a chance today I'll put up pictures of the inside of the mount.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By snaggletooth1925:
Originally Posted By stoner63a:
How does the plastic feel? With the Asian made airsoft its a crapshoot if you get some extremely cheap cast resin absolute junk, some polystyrene (model kit) plastic, or low grade nylon instead of the original spec glass filled nylon, zytel, etc.


Seems like the plastics is decently strong. I haven't noticed any really bad flexing when appling outward pressure.

If I get a chance today I'll put up pictures of the inside of the mount.



I have a set of these also and have been using them over the past few weeks. They lock up strong, no noticable flexing, and I am confident with them.
Link Posted: 11/27/2013 7:36:51 PM EST
Fuck me. More then I was hoping theyd be. Buy now I need a set of REAL ARC Rail adapters. But def look like they are worth the money. Big props for this guy finally filling a need that from what Iv been reading has bee around for a long time.
Link Posted: 12/11/2013 5:08:28 PM EST
Update with pics
Link Posted: 12/12/2013 7:33:54 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By snaggletooth1925:
Update with pics
View Quote


Glad it worked out for you with the SARAs

Link Posted: 12/12/2013 7:44:43 AM EST
Top Top