Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/13/2010 12:40:08 PM EST
I've got a bunch of .44 magnum I've been saving. Got the gear to start reloading and started tumbling my brass. I guess some of it got shot in the rain or snow because it's kind of tarnished. Looks like carbon. I have tumbled it for hours using walnut shell media. This cleaned it up a bunch but not entirely. When I scratched at it with a knife you could see clean brass underneath. It is also totally smooth on the outside where the discolorations are.

It looks safe to use but thought I would ask the hive. None of my friends reload.I tried to take pics but the stuff doesnt show up in a photo. Thanks
Link Posted: 9/13/2010 12:48:54 PM EST
won't hurt it. I load tarnished 9mm brass al the time. Just make sure it is tarnish and not corroded. If it bothers you just use a real fine steel wool and touch it up.
Link Posted: 9/13/2010 12:59:19 PM EST
It'll reload just fine. If you want to remove any oxidation, soak the brass in a solution of Lemishine. Do a search and you'll find several threads on the subject. You can pick Lemishine up at a grocery store in the dish detergent isle.
Link Posted: 9/13/2010 2:44:42 PM EST
Originally Posted By ten-ring:
I've got a bunch of .44 magnum I've been saving. Got the gear to start reloading and started tumbling my brass. I guess some of it got shot in the rain or snow because it's kind of tarnished. Looks like carbon. I have tumbled it for hours using walnut shell media. This cleaned it up a bunch but not entirely. When I scratched at it with a knife you could see clean brass underneath. It is also totally smooth on the outside where the discolorations are.

It looks safe to use but thought I would ask the hive. None of my friends reload.I tried to take pics but the stuff doesnt show up in a photo. Thanks


gpt photos OP
Link Posted: 9/13/2010 4:10:30 PM EST
Top Top