Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
Posted: 12/26/2003 12:11:38 PM EDT
Link Posted: 12/26/2003 1:30:50 PM EDT
White gauze maybe?

White gaffers tape. Unless you leave it on for years or expose it to a lot of heat, it will come off without leaving a residue.
Link Posted: 12/26/2003 3:44:12 PM EDT
What about surgical tape?  Its a glossy white, but it will attract dirt so you can dull it out.  Any adhesive left behind should remove with mineral spirits.
Link Posted: 12/26/2003 8:07:18 PM EDT
I second the white gauze.

Link Posted: 12/27/2003 8:12:50 AM EDT
[Last Edit: 12/27/2003 8:13:16 AM EDT by raf]
Link Posted: 12/27/2003 12:25:06 PM EDT
[Last Edit: 12/27/2003 12:26:10 PM EDT by Aimless]
Link Posted: 12/27/2003 9:52:58 PM EDT
Aimless I wouldn't worry about the flamability of the burlap unless your going to be shooting alot of FA.  

I have used burlap for year both on my precision rifles and my AR's with no problems.  It is cheap and it can be customized to the colors you are looking for.
Link Posted: 12/27/2003 10:09:01 PM EDT
What about a couple of pieces of ol white socks.  You could cut rings and stretch them over parts of your rifle, no residue.
Link Posted: 12/27/2003 10:34:17 PM EDT
Rip up an old bedsheet and tie strips to the rifle.

There's a wall covering that simulates burlap(used as a wall covering), it's called Tasso-glas. It comes in different sizes of mesh. Since it's fiberglass, it won't hold moisture like the burlap will. I've never tried to camo a rifle with it, so I don't know how it would work.
Link Posted: 12/29/2003 5:51:17 AM EDT
how about the light gray furniture Cav Arms has?  i was going to buy some for that reason.
Link Posted: 12/29/2003 6:01:57 AM EDT
Link Posted: 12/29/2003 6:59:41 AM EDT
Don't be a cheap penguin, send it to Brasspile for a proper paintin!
Link Posted: 12/29/2003 2:51:57 PM EDT
HR,

Does Brass have a web site?  I'd like to see some samples of his stuff.
Link Posted: 12/29/2003 3:39:43 PM EDT
[Last Edit: 12/29/2003 3:42:21 PM EDT by Aimless]
Link Posted: 12/30/2003 2:28:27 PM EDT
Thanks!
Top Top