Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Tacked Sig MCX/MPX Photo Thread (Page 42 of 44)
Page / 44
Link Posted: 6/2/2023 10:57:06 AM EDT
[#1]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By brazos609:


Pretty close to the same OAL as my 6.75" Virtus with the same handguard and SLH762C.  Mine sticks out about half an inch.

https://www.ar15.com/media/mediaFiles/151059/20220709_134301_jpg-2837530.JPG
View Quote



If I were to do it again, I'd probably pick your setup.
VP
Link Posted: 6/2/2023 11:43:07 AM EDT
[#2]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Kublah:
If I were to do it again, I'd probably pick your setup.
View Quote

If you mean Virtus 6.75" instead of Rattler 5.5", its not too late to grab a 6.75" barrel for your Rattler.  Since you're using the Virtus SD handguard with the adapter you'll still be able to reach the 6.75" gas valve.
Link Posted: 6/3/2023 12:50:59 PM EDT
[#3]
There is more involved in it than just the barrel. What I mean is I would pick the virtus upper/barrel and the compatibility that brings in general.
Link Posted: 6/3/2023 4:04:00 PM EDT
[#4]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Kublah:
There is more involved in it than just the barrel. What I mean is I would pick the virtus upper/barrel and the compatibility that brings in general.
View Quote

I thought about going this route with my Rattler but I ended up with more MCX's all together. If in this position I wouldn't add the barrel, rather I would just get the desired VIRTUS upper to toss on. Honestly by then you'd also have an adapter and trigger so you may as well throw it on an AR lower and just have another gun all together!

Not sure why but the Rattler excels at being the Rattler! I don't want to change it lol.
Link Posted: 6/4/2023 8:31:34 AM EDT
[#5]


9” barrel.
HuxWrx Flow 762 Ti
Link Posted: 6/4/2023 10:14:34 AM EDT
[#6]
Discussion ForumsJump to Quoted PostQuote History
View Quote


Is it quieter than the SLH300 or SLH762?
Link Posted: 6/4/2023 10:55:36 AM EDT
[#7]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SpyHawk:


Is it quieter than the SLH300 or SLH762?
View Quote


I think the SLH300 is still quieter. But it is at least almost 1.5x longer and 4 ounces heavier. Still one of my favorite cans.

Everything in life is about balance. My law of Conservation of Everything. Subtract somewhere, add somewhere else.
Link Posted: 6/9/2023 9:42:18 PM EDT
[#8]
Link Posted: 6/16/2023 5:08:30 AM EDT
[#9]
Attachment Attached File

I think it's time to get some new furniture!

Link Posted: 6/19/2023 10:27:26 AM EDT
[#10]
11.5 MCX upper with H&R M16A2 Lower

Attachment Attached File

Link Posted: 6/20/2023 9:49:38 PM EDT
[#11]
Scored a sig srd762 the other day for a good price and my Altrd handguard should be here next month.
Link Posted: 6/20/2023 9:57:32 PM EDT
[#12]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By coachwhip99:
Scored a sig srd762 the other day for a good price and my Altrd handguard should be here next month.
View Quote

Did you receive word from them on shipping or something? I ordered last October, and they've stopped answering emails/IG messages for me . . .
Link Posted: 6/21/2023 1:17:20 PM EDT
[#13]
I ordered last October as well and I haven’t been able to reach them either. A guy on Reddit got in touch with him and he said they should be shipping end of July and that this batch was slower because less people ordered them and they had a delay getting aluminum from England. I am really hoping we get our handguards!
Link Posted: 6/22/2023 10:47:21 PM EDT
[#14]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Daggertt:
Don't think I've posted this pic yet.

It used to be spray painted.

https://www.ar15.com/media/mediaFiles/435611/20220917_140544_jpg-2793138.JPG


View Quote


I think mine needs to perform and look like this sexy and experienced little number.
Link Posted: 6/26/2023 6:56:06 AM EDT
[Last Edit: SMFdarkangel] [#15]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By coachwhip99:
I ordered last October as well and I haven’t been able to reach them either. A guy on Reddit got in touch with him and he said they should be shipping end of July and that this batch was slower because less people ordered them and they had a delay getting aluminum from England. I am really hoping we get our handguards!
View Quote

My last pre-order back in 2021 took over 8.5 months to receive. It’s a long lead time but they do quote 6-9 months up front. I hope you get yours soon!

ETA: It was 8 months 26 days.
Link Posted: 7/2/2023 7:32:11 PM EDT
[#16]
I finally got my SD handguard and some paint on my MCX.

Attachment Attached File
Attachment Attached File

Link Posted: 7/3/2023 6:09:19 AM EDT
[#17]
Mounted up in the closet for HD Attachment Attached File


And new to me MCX set up as my truck gun
Attachment Attached File
Link Posted: 7/6/2023 7:03:11 PM EDT
[#18]
Link Posted: 7/6/2023 7:47:28 PM EDT
[#19]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By tactical_dude:
https://i.postimg.cc/PJ5VjGKk/20230706-155517.jpg
View Quote


Saving these pics to the spank bank
Link Posted: 7/13/2023 11:17:06 PM EDT
[#20]
Link Posted: 7/16/2023 11:25:24 PM EDT
[#21]
Ok fellas  I kind of f'ked up and put an MPX Radian Raptor charging handle in my VIRTUS and RATTLER and I just realized.

Works just fine but what am I missing? Immediately remove or no issues with running it?
Link Posted: 7/20/2023 6:44:42 PM EDT
[#22]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By GLD1980:
Ok fellas  I kind of f'ked up and put an MPX Radian Raptor charging handle in my VIRTUS and RATTLER and I just realized.

Works just fine but what am I missing? Immediately remove or no issues with running it?
View Quote


Remove it.  The charging handles are not the same.
Link Posted: 7/20/2023 6:49:24 PM EDT
[#23]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Magsz18:


Remove it.  The charging handles are not the same.
View Quote

Thank you very much for the advice. I did remove them, post haste! That could of really sucked.
Link Posted: 8/7/2023 9:20:24 AM EDT
[#24]
Link Posted: 8/8/2023 8:47:28 AM EDT
[#25]
Link Posted: 8/8/2023 11:17:59 AM EDT
[#26]
Legacy MCXs and Brens…


Link Posted: 8/9/2023 8:59:50 PM EDT
[#27]
Discussion ForumsJump to Quoted PostQuote History
View Quote

This is the way.
Link Posted: 8/9/2023 10:50:32 PM EDT
[#28]
Two MCX Legacy rifles arrived today. All of these are gen 1’s…

Link Posted: 8/11/2023 11:37:17 AM EDT
[#29]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Citizen904:
Two MCX Legacy rifles arrived today. All of these are gen 1’s…

https://i.ibb.co/G52Y8xB/F8-EEEA1-B-7-A46-4-F3-B-B686-7-B6-E35-D39308.jpg
View Quote



I love my gen 1.   I haven’t played with the new spear, but I don’t like the weight of the virtus
Link Posted: 8/13/2023 3:28:02 AM EDT
[#30]
HK G3 collapsing stock vibes with the sig 2 pos stock on the MCX Spear-H. Shes porky at 13.5lb loaded with the fixed B5 sopmod stock.


Link Posted: 8/19/2023 3:20:06 PM EDT
[#31]
Link Posted: 8/21/2023 5:42:51 PM EDT
[Last Edit: Citizen904] [#32]
The Spear LT landed in the collection today. Here it is along with 5 gen 1 MCXs.



Link Posted: 8/28/2023 9:02:57 AM EDT
[#33]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By coachwhip99:
I ordered last October as well and I haven’t been able to reach them either. A guy on Reddit got in touch with him and he said they should be shipping end of July and that this batch was slower because less people ordered them and they had a delay getting aluminum from England. I am really hoping we get our handguards!
View Quote

@coachwhip99 Have you received your handguard yet?
Link Posted: 8/28/2023 11:21:28 AM EDT
[Last Edit: JohnnyUtah427] [#34]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SMFdarkangel:

@coachwhip99 Have you received your handguard yet?
View Quote

I placed an order for a handguard on 10/5/2022.   I reached out back in June and heard nothing.  Also heard others reached out and heard nothing as well.....

I just now started a case through PayPal for a refund, so I figure that will get his attention, but unfortunately, the case is denied because it is more than 180 days from purchase......
Link Posted: 8/30/2023 12:50:38 PM EDT
[#35]
Legacy MCX with a light weight AGP Arms 1913 stock…

Link Posted: 8/30/2023 3:55:18 PM EDT
[#36]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By JohnnyUtah427:

I placed an order for a handguard on 10/5/2022.   I reached out back in June and heard nothing.  Also heard others reached out and heard nothing as well.....

I just now started a case through PayPal for a refund, so I figure that will get his attention, but unfortunately, the case is denied because it is more than 180 days from purchase......
View Quote

I got one on his second batch and I believe he was quoting 4 months. I finally received it after 9 or 10 months.
Link Posted: 8/30/2023 3:57:25 PM EDT
[#37]
Link Posted: 8/30/2023 4:03:13 PM EDT
[#38]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By sbye:

I got one on his second batch and I believe he was quoting 4 months. I finally received it after 9 or 10 months.
View Quote


We are past 10 months....Doesn't seem right, especially with the no comms.
Link Posted: 8/30/2023 4:13:19 PM EDT
[#39]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By sbye:

I got one on his second batch and I believe he was quoting 4 months. I finally received it after 9 or 10 months.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By sbye:
Originally Posted By JohnnyUtah427:

I placed an order for a handguard on 10/5/2022.   I reached out back in June and heard nothing.  Also heard others reached out and heard nothing as well.....

I just now started a case through PayPal for a refund, so I figure that will get his attention, but unfortunately, the case is denied because it is more than 180 days from purchase......

I got one on his second batch and I believe he was quoting 4 months. I finally received it after 9 or 10 months.

I think I was in on his 2nd batch.  About the same time from order to ship.

Tbh, I was actually surprised when it showed up.  Figured it was a gamble to begin with. He was more active on IG back then and responded to the couple emails I sent (not related to timeline, just adding stuff to the order).
Link Posted: 8/31/2023 9:45:19 AM EDT
[#40]
Size comparison between rattler and standard 14.5” SBR

Attachment Attached File
Link Posted: 8/31/2023 7:16:23 PM EDT
[Last Edit: Citizen904] [#41]
https://youtube.com/shorts/xw5-__1rzMI?feature=shared
Link Posted: 8/31/2023 10:13:53 PM EDT
[#42]
Stevie, what can do you have on your Rattler?
Link Posted: 9/1/2023 12:01:36 AM EDT
[#43]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SMFdarkangel:

@coachwhip99 Have you received your handguard yet?
View Quote

Unfortunately not really hope it shows up. Gunna suck if I can’t get my last price to my clone since I already hunted down the can.
Link Posted: 9/1/2023 5:35:50 AM EDT
[#44]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By astrocreep96:
Stevie, what can do you have on your Rattler?
View Quote


It’s a Rex MG7k in 308. Sounds good enough but it’s heavy. Was $352+ stamp locally so I figured why not.

It’s direct thread not but I’m going to add a QD set up eventually so I can swap it back and forth on other hosts.

Attachment Attached File
Link Posted: 9/5/2023 7:55:38 AM EDT
[#45]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By steviesterno16:


It’s a Rex MG7k in 308. Sounds good enough but it’s heavy. Was $352+ stamp locally so I figured why not.

It’s direct thread not but I’m going to add a QD set up eventually so I can swap it back and forth on other hosts.

https://www.ar15.com/media/mediaFiles/455820/IMG_5118_jpeg-2939152.JPG
View Quote


I also have an MG7K, and dude it is NOT heavy compared to most other steel silencers.
Link Posted: 9/5/2023 9:33:09 AM EDT
[#46]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SpyHawk:


I also have an MG7K, and dude it is NOT heavy compared to most other steel silencers.
View Quote


@SpyHawk really? I don't have any other steel cans. Just a Rev45 pistol can and something in 22, so not much time behind them.
Link Posted: 9/6/2023 7:06:22 AM EDT
[#47]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By steviesterno16:


@SpyHawk really? I don't have any other steel cans. Just a Rev45 pistol can and something in 22, so not much time behind them.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By steviesterno16:
Originally Posted By SpyHawk:


I also have an MG7K, and dude it is NOT heavy compared to most other steel silencers.


@SpyHawk really? I don't have any other steel cans. Just a Rev45 pistol can and something in 22, so not much time behind them.


Oh yeah. I mean, it's the range of 12 oz. That is very light for a steel suppressor.

The reason cans feel so heavy on the gun is because they are all the way out on the end and have more leverage against you.
Link Posted: 9/6/2023 8:30:05 AM EDT
[#48]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SpyHawk:


Oh yeah. I mean, it's the range of 12 oz. That is very light for a steel suppressor.

The reason cans feel so heavy on the gun is because they are all the way out on the end and have more leverage against you.
View Quote


makes sense... I am coming from an 18" bull barrel with 3" comp on a 12.5 pound rifle. The rattler already feels much lighter by comparison, so I'm not bitching too much
Link Posted: 9/6/2023 8:03:52 PM EDT
[#49]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By steviesterno16:


It’s a Rex MG7k in 308. Sounds good enough but it’s heavy. Was $352+ stamp locally so I figured why not.

It’s direct thread not but I’m going to add a QD set up eventually so I can swap it back and forth on other hosts.

https://www.ar15.com/media/mediaFiles/455820/IMG_5118_jpeg-2939152.JPG
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By steviesterno16:
Originally Posted By astrocreep96:
Stevie, what can do you have on your Rattler?


It’s a Rex MG7k in 308. Sounds good enough but it’s heavy. Was $352+ stamp locally so I figured why not.

It’s direct thread not but I’m going to add a QD set up eventually so I can swap it back and forth on other hosts.

https://www.ar15.com/media/mediaFiles/455820/IMG_5118_jpeg-2939152.JPG


Thanks for the info, it looks nice.  I need to buy one for my Rattler, I've been looking at a Q suppressor.

I really hate the process of buying suppressors.  I bought one last month using SilencerShop for my MP K-Pistol, and it still hasn't been certified.  It'll be 2025 before I get the damned thing.
Link Posted: 9/9/2023 5:09:23 PM EDT
[#50]


Trying to figure out whether or not to run either offset irons or an offset red dot.
Page / 44
Tacked Sig MCX/MPX Photo Thread (Page 42 of 44)
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top