Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
12/6/2019 7:27:02 PM
Posted: 2/18/2007 3:17:11 AM EST
I am looking for a drilling fixture to install ghost ring sights on my 870. Brownells used to carry them a few years ago. Does anyone know where I can get one? I have looked all over the net. They seemed to have disappeared. HELP!
Link Posted: 2/18/2007 2:14:13 PM EST
Email both Brownell's and Midway.
They will either have what you need, or know where to get it.
Link Posted: 2/18/2007 3:32:04 PM EST
[Last Edit: 2/18/2007 3:32:29 PM EST by guncrank1]
No help with the fixture but I had a customer who bought a used gun that had a Wilson sight and the front had to be re glued back and I drill and tapped a extra screw as well.
So if you use a glued on front degrease really well and use a good bonding material.
Link Posted: 2/18/2007 3:34:39 PM EST
Hmmm...installed three sets and never used a fixture. Just follow the measurements in the instructions. I do always add a roll pin through the bead base on the front sight. Just can't trust the glue alone.
Link Posted: 2/21/2007 5:51:58 PM EST
Milldude, it's your lucky day (if you don't miss it). I think this is what you are looking for...
Click Here!
Link Posted: 2/23/2007 3:28:12 PM EST
Thanks for the replies! I decided to forego the fixture and drill it in the drill press.
Top Top