Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/28/2005 8:39:29 AM EDT
Trigger will not drop the pin. I believe this gun was made by Noble for S&W. Any ideas , or anyone have an info on repair tips? The trigger guard is plastic and cheap looking.
Link Posted: 8/28/2005 12:57:10 PM EDT
If you have a Model 916, this is BAD news.
The 916 was a major disaster for S&W, and at one point they actually considered buying all the guns back to regain their damaged reputation.

When S&W dropped the thing, Gun Parts Corporation bought all the parts:
www.e-gunparts.com

Without being able to actually examine the gun, there's no way to tell what the problem is.

Basically, you look for the reason why the trigger and sear assembly isn't releasing the hammer.
This is assuming the hammer or it's spring isn't defective, and the safety is allowing the trigger to move back.

Bottom line: Sorry, you got one of the few dogs S&W ever sold, and the worst pump shotgun ever made in America.
Link Posted: 8/28/2005 1:02:29 PM EDT
[Last Edit: 8/28/2005 1:03:59 PM EDT by Rocky9_5]
looks to be a 916. Its more of a play gun than anything. Thanks for the link for parts. Damn screw face is too soft. It started to strip out instead of unscrew. Will have to work the srcew out and go from there.
Link Posted: 8/31/2005 2:42:38 PM EDT
update, got the screw out and found a big buch of crud in the trigger group. Works fine now. Thanks for the info on the 916.
Top Top