Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/14/2005 1:28:00 PM EST
Looking for some info from SP89 or MP5K owners..

Where are the cocking handle retaining pin clearance holes in the cocking tube? I have been looking at pics and can't seem to find them. I am guessing they are in/under the handguard hanger?

What is the length of the ribbed section of the cocking tube? Just the ribbed portion, I have the lengths on the hold open slot and the tapered section.

Thanks in advance for the help.
Link Posted: 12/14/2005 3:54:18 PM EST
the pin hole is right on top, bout 1/2 " back from the cockin handle(if forward), its in the ribed section, which is prolly 1.5" long, if ya want me to find a tape measure let me know. ....but even so.......for gods sake don't build anything off my measurements ;)

this is on a SP89.
Link Posted: 12/14/2005 4:25:50 PM EST
ok, reviewing pics after reading your post, I can see where the hole is.

You have been a big help.

I think I have figured out the ribbed section. I may be off by a few .001's but I think it will be hard to tell by eye.
Top Top