Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 1/17/2015 4:41:15 PM EST
As the subject says, I've recently built my first SBR (11.5") and I primarily reload. Has anyone done any research on if there is a powder that works 'better' in a SBR than others? I know 'what works me may not work for you.". But just seeing if there's a general consensus that power X tends to work better within the limitations of a shorter barrel.

I normally use either H335, H332 for blasting ammo. Why? Because I was able to acquire a 8lb keg of each and no other reasons so I'm certainly not stuck on it, now that powder is more readily available. .

By 'better' I mean a few things. Cleaner burning, slower pressure spike so you can get a bit more FPS out of it to make up for the loss of FPS from the barrel length but without blowing primers. That kind of thing.
Link Posted: 1/17/2015 6:07:11 PM EST
It shouldn't make any difference. If you have function issues go to a slower burning powder. I like H322 in .223 for any bullet weighing 55 grains or less.
Top Top