Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/10/2003 2:23:52 PM EST
I have a PoyTech M1A that has been through Fulton Armory for the upgrade. I've got a scope mount to put on it, but I need to remove the stripper clip guide first. There's what appears to be a pin holding the guide in, as it doesn't seem to have a hex head or anything to fit a tool to and back it out.

Any hints?
Link Posted: 6/10/2003 2:34:21 PM EST
It's a pin. Just take a punch and drive the pin on through. That's all I had to do with my SA.

Link Posted: 6/10/2003 10:50:53 PM EST
Punch out the roll pin.Then remove stripper clip guide with a punch (brass) and hammer from left to right (with rifle pointed down range).Remove the receiver from the stock first.
Link Posted: 6/11/2003 3:09:05 AM EST
Thanks, y'all! That did the trick. Now, I just need to get to the range to sight it in...
Top Top