Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
10/30/2020 2:42:12 PM
Page / 2
Next Page Arrow Left
Link Posted: 1/11/2013 2:07:37 PM EST
[Last Edit: 7/24/2013 8:10:50 AM EST by John87]
Tools for removing Primer Crimp, priced low to high. Note: there are other brands and sources for these tools, this is just an outline. They all work fine.

Hand-held Primer Pocket Reamer Tool(the bit from this tool can be chucked into a screw-gun) Small Pocket , Large Pocket @ $10


Single Stage Press Primer Pocket Swager Small and Large Die Set @ $35


Bench Mounted Primer Pocket Swager Bench Mount @ $80


Case Prep Center Prep Center @ $130


High-end Progressive Reloaders 1050 Price varies, @ $1600
Link Posted: 1/17/2013 4:08:29 PM EST
Link Posted: 2/13/2013 11:19:23 PM EST
[Last Edit: 2/13/2013 11:19:50 PM EST by H60ADriver]
Link Posted: 3/27/2013 8:16:17 AM EST
Link Posted: 6/26/2013 11:11:00 AM EST
Link Posted: 6/26/2013 11:11:12 AM EST
Link Posted: 7/11/2013 10:26:10 PM EST
[Last Edit: 7/12/2013 1:04:04 PM EST by AeroE]
http://www.ar15.com/forums/t_6_42/402870_Dillon_550b_is_not_aligning_well_with_my_45_ACP_cases.html

How to align the shell plate base on a Dillon 550b  for cases that don't load well into your dies.

Go to the end of the thread for the alignment procedure.

Edited.  AeroE
Link Posted: 10/6/2013 7:33:53 AM EST
[Last Edit: 10/6/2013 7:36:36 AM EST by TZ250]
Increase single-stage productivity. Link to a DIY RCBS case kicker:

Case Kicker
Link Posted: 7/16/2014 1:28:18 PM EST
Link Posted: 6/27/2016 9:48:05 PM EST
Link Posted: 6/28/2016 5:35:25 PM EST
Link Posted: 11/7/2019 6:32:22 PM EST
[Last Edit: 11/7/2019 6:33:31 PM EST by BEANC0UNTER]
I had not looked at this in a while but I noticed that all the image links to the treadmill tumbler conversion are gone.  I have the pictures saved that I can upload but the thread is archived so I cannot do anything with the thread.  I am not sure if this would be of interest or not but if someone wants to tell me what to do I can add all the pictures to the end of the thread if it would help...

This is the thread I am talking about

https://www.ar15.com/forums/armory/Conversion_of_treadmill_to_ss_media_tumbler___UPDATE___Finished_and_running/42-384183/?#
Link Posted: 7/14/2020 2:09:20 PM EST
Page / 2
Next Page Arrow Left
Top Top