Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/29/2003 4:44:43 PM EST
Every so often(30 or 40rnds) my M1A scout won't strip a new round from the mag. I have only noticed this problem with port ammo. The rifle has about 1000rnds through it and this problem has occurred since it was new. I thought perhaps it just needed to be broken in a little, but that does not seem to be the case. It appears that it is a short recoil problem. Anyone know a solution?
Link Posted: 10/29/2003 4:51:35 PM EST
Don't use Port ammo.

I suppose you could measure the port rounds and compare them to others to see if there are differences, but all ammo doesn't work well in all guns.

I wouldn't use Port, or put up with the problem, may have been a bad batch.
Link Posted: 10/29/2003 6:32:38 PM EST
[Last Edit: 10/30/2003 9:03:38 AM EST by QuinlanV]
That Portuguese ammo is just so damn cheap. I don't mind all that much. Just thought I would see if it could be tweaked in some way to help.
Link Posted: 10/30/2003 4:29:15 AM EST
Go over to battlerifles.com and look for a guy named tuefelhund ( or something like that ) he may have the answer to your questions...the dude is an M14 guru.
Link Posted: 10/30/2003 12:41:57 PM EST
The Port is possibly the best surplus ammo that you can buy.

The problem is with your rifle or your mags.
Link Posted: 10/30/2003 2:34:11 PM EST

Originally Posted By cornbread2:
The Port is possibly the best surplus ammo that you can buy.

:: cough :: Australian!!!! :: cough ::
Link Posted: 10/31/2003 6:07:31 AM EST
Then I'll add my .02 worth..... I think that the new LC03 M80 ammo that the CMP has is the best.....
Link Posted: 11/1/2003 4:16:04 PM EST
I just put 100 rounds of the Santa Barbara 308 thru my M1A, no problems to report. Sportsmans guide is selling it, good stuff.
Top Top