Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
1/27/2021 11:01:57 PM
1/27/2021 12:46:26 AM
Posted: 1/2/2007 2:12:01 PM EST
I just got a new Pelican 1750 for Christmas. I am going to put my M1-A and TRP OP in it. How has everybody cut their foam to fit? I don't really want to hack up a $70 piece of foam. Please help, and I would love to see pics your custom cases. Thx
Link Posted: 1/2/2007 2:15:04 PM EST
I used my jig saw with a fine tooth blade.... works great.
Link Posted: 1/2/2007 3:21:52 PM EST
I was recommended (and used) an electric knife. Worked like a charm.
Link Posted: 1/2/2007 3:44:11 PM EST
Use an electric carving knife and go slow, letting the knife do all the work. I used a black felt tip pen to trace my gear on the foam, it worked better than the chalk pelican recommended.
The replacements shouldn't be nearly 70 for foam. I changed configs. on my M$ and needed new foam it cost me 30 shipped for the bottom 2 pieces of foam.
Link Posted: 1/2/2007 7:21:48 PM EST
A sharpie to mark it and an electric carving knife to cut with.
Cut a little on the small side to begin with.  It's always easier to cut more off than to put it back on
Link Posted: 1/2/2007 7:25:11 PM EST
Link Posted: 1/2/2007 7:27:19 PM EST
there's a thread on this somewhere, I think it's on the AR-15 discussions by Mfingar.  He's got pics and instructions; excellent work IMO.  Otherwise drop him an IM.  
Link Posted: 1/2/2007 7:28:20 PM EST

Look here

that's the one.  
Link Posted: 1/2/2007 7:44:54 PM EST
Look here

WOW - I guess I won't be using the carving knife anymore.
Link Posted: 1/2/2007 10:31:16 PM EST
Awesome. I knew that everyone would be very helpful. Thank you guys a lot!!!
Top Top