Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
12/6/2019 7:27:02 PM
Posted: 11/12/2013 4:58:55 PM EST
I finally got my PS90 a couple of months ago. I stuck an RMR on it, but it sits a little too high for my tastes. I'm not married to the optic, it was just what I had lying around. Before I spend the money on the lower RMR mount, I would like to know what others are using.
Link Posted: 11/12/2013 5:31:41 PM EST
[Last Edit: 11/12/2013 5:34:33 PM EST by xwinder]
Leupold Delta Point. If you find a lower mount option, I'd be interesting in seeing the setup. Without going with an aftermarket receiver like Thompson Machine makes, it's tough.
Link Posted: 11/13/2013 4:37:25 AM EST
I'm running an Aimpoint M3 on a TROS mount.

Link Posted: 11/13/2013 5:07:41 AM EST
Damage Industries low rail with an EOTech XPS2.

It sits a little high but it is the only optic I've tried that I liked enough to keep on it. I found both of the factory optics to be too low and too narrow of FOV, I found the factory CMore MRD sight to be too far forward and again too low for my tastes, I tried a TROS Mini ACOG mount and while I liked the height, I still wanted a larger FOV.

I've been thinking of getting a TROS 30mm Aimpoint mount and trying that route... I dunno. Every time I put a different optic on this thing it never feels "right". I either get the height I like but too small of a FOV, or I get the FOV I like but it sits too high. I like the platform but the non-tri rail is a total football bat of a soup sandwich when it comes to optics.
Link Posted: 11/13/2013 5:35:09 AM EST
Trijicon TriPower
Link Posted: 11/13/2013 5:57:33 AM EST
I used an XPS EOtech for years. But, I previously had two PS90s. I sold that one and kept the one with the black ringed factory optic.

I like the grab and go factor - no batteries. And, the smaller profile. When you start strapping big 2 cell lights and big optics to the gun, it's no longer slim and small IMHO.

Here is a pic of the two before I sold one of them:

Link Posted: 11/13/2013 6:26:38 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By JsARCLIGHT:
Damage Industries low rail with an EOTech XPS2.

It sits a little high but it is the only optic I've tried that I liked enough to keep on it. I found both of the factory optics to be too low and too narrow of FOV, I found the factory CMore MRD sight to be too far forward and again too low for my tastes, I tried a TROS Mini ACOG mount and while I liked the height, I still wanted a larger FOV.

I've been thinking of getting a TROS 30mm Aimpoint mount and trying that route... I dunno. Every time I put a different optic on this thing it never feels "right". I either get the height I like but too small of a FOV, or I get the FOV I like but it sits too high. I like the platform but the non-tri rail is a total football bat of a soup sandwich when it comes to optics.
View Quote


When I used one of the Promoted Pawn low mount rails, my Aimpoint set WAY too high, the TROS mount only drops it around 3/8" over the Promoted Pawn rail but that is enough to make it feel "Right".

Plus, even though I love the Aimpoint T-1 I have on my duty AR I felt that it didn't "look right" on the PS90. The M3 looks like it belongs
Link Posted: 11/13/2013 11:00:36 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Shipwreck:I sold that one and kept the one with the black ringed factory optic.
I like the grab and go factor - no batteries. And, the smaller profile. When you start strapping big 2 cell lights and big optics to the gun, it's no longer slim and small IMHO.
View Quote



^ +1
Link Posted: 11/13/2013 4:13:01 PM EST
THE WHITE DONUT OF DEATH i LOVE IT
Link Posted: 11/14/2013 9:54:48 AM EST
Thanks for the replies. I think I will try the lower mount for the RMR first.

Link Posted: 11/14/2013 9:59:16 AM EST
My PS90 included an FN USG Red Dot.
Link Posted: 11/14/2013 11:42:59 AM EST
I bought my PS90 with the FN/C-More STS red dot sight. It's very compact and the 'auto' setting does a good job adjusting to the brightness of your condidtions. It sits nice and low and C-More provides the mount for it that fits perfect.
Link Posted: 11/14/2013 11:48:26 AM EST
I use the USG black sight that came with mine. Modded with a REM 3TB. Functional with no battery use unless low light/dark conditions.
Link Posted: 11/16/2013 12:53:17 PM EST
The rail that came with mine looks significantly higher than most of the others pictured.

Link Posted: 11/16/2013 6:32:52 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Ras_Thavas:
The rail that came with mine looks significantly higher than most of the others pictured.

https://dl.dropboxusercontent.com/u/3731296/IMG_1151%20%28Medium%29.JPG
View Quote


THAT is because that is a factory rail. You need to look at the aftermarket to get lower.
Link Posted: 11/16/2013 7:09:31 PM EST
[Last Edit: 11/16/2013 7:11:07 PM EST by BDA]
aimpoint H1... arms mount... sits just fine, sighted in just fine... good for the ranges you'd expect to you it.
Link Posted: 11/16/2013 11:36:20 PM EST
I use the FN green dot. Green catches my eye, my ACOG on my AR is green also.
Link Posted: 11/24/2013 12:03:19 PM EST
Aimpoint Comp ML2 with low mount on a Halo triple rail.

http://i11.photobucket.com/albums/a177/panzerdwill/G%20stuff/ps90_ML2a.jpg
Link Posted: 11/24/2013 6:56:42 PM EST
[Last Edit: 11/26/2013 6:29:14 PM EST by Michael64]
Removed the factory sight and replaced it with a Halo triple rail.
Added an Aimpoint 5000 on top.

Great combo.

Link Posted: 11/26/2013 11:25:28 AM EST
Aimpoint Comp M4S
Link Posted: 11/26/2013 2:01:24 PM EST
Aimpoint Micro T-1 on a Larue Low Mount. P90TR SBR.
Link Posted: 11/29/2013 7:40:22 AM EST
Aimpoint H1 on mine (It is mine I paid for it but my wife wont let me have it back!)
Link Posted: 11/29/2013 8:03:01 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By nhgunnut:
Aimpoint H1 on mine (It is mine I paid for it but my wife wont let me have it back!)
View Quote


I feel your pain!
Link Posted: 11/30/2013 3:26:07 PM EST
I use the green ring sight with a rem t3b. Besides the narrow field of view, it checks all of the other boxes for me.
Link Posted: 12/4/2013 9:13:29 PM EST
Black reticle. Also have a TROS low profile Aimpoint available, but like the OE Black better.
Link Posted: 12/14/2013 4:11:23 AM EST
T1 on a TR
Top Top