Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/29/2002 4:13:07 PM EST
I am looking for a "G3" replica. I saw one at a local gun shop today and wanted to find some info but am unable to come up with anything.
They had one with a springfield reciever for about $1200. Is this a good deal or would it be cheaper to buy a kit and build one? If not how hard is it to find a reciever for this kit.

Link Posted: 3/29/2002 4:18:03 PM EST
www.gunsnstuff.net. I have seen G3 clones in the $500 range around here.
Link Posted: 3/29/2002 4:20:46 PM EST
www.gunsnstuff.net/html/rifles.html. Here is a more direct link for you.
Link Posted: 3/29/2002 4:26:47 PM EST

Why so cheap? Are they total Junk?
Link Posted: 3/29/2002 4:27:55 PM EST
I dont really know all that much about them but can offer some info. I see the Springfield G3s here in Wa state retail for around a grand +/- $50. The Springields are the best ones to get but are almost 2X the price of the Century & Hesse parts guns. Hesse is the worst. You will get what you pay for and are probably better off to get the Springfield. I did read some posts in the Build It Yourself forum about building one from a kit and I think everyone felt that unless you were a capable machinist it would be very difficult to build one.
Link Posted: 3/29/2002 4:35:08 PM EST
I will say that building one is quite difficult.

If you buy one complete, then it is possible to get a bad one, but it is just as possible to get a good one. I have tried a G3 on a Hesse receiver, I shot from the prone position and fire a 5 shot group with open sights and kept it under 2".

I will say that if I were going to spend the $500 on a semi auto .308 I would get an FN clone myself. Actually I did, I have an L1A1 on an Imbel receiver and I like it 10X's more then any of the G3 clones I have tried.
Link Posted: 3/29/2002 4:37:02 PM EST
[Last Edit: 3/29/2002 4:46:57 PM EST by Aimless]
Link Posted: 3/29/2002 5:07:07 PM EST

Originally Posted By markm:

Why so cheap? Are they total Junk?

They must be the equivalent of OLYMPIC ARMS...

Link Posted: 3/29/2002 5:14:16 PM EST
Hmm very intresting. Thanks for the help guys.

To answer Aimless the clone I saw said "Springfield" and it was $1250.00
I asked the guy if it was HK parst with a lower reciever, he said they were "imported" parts but the upper and lower recievers were US made.

Just curious, what would a REAL G3 cost these days?
Link Posted: 3/29/2002 8:08:27 PM EST
[Last Edit: 3/29/2002 8:19:10 PM EST by Aimless]
Link Posted: 4/1/2002 12:10:00 PM EST
I beleive that the Springfield Armory G3's are assembled from imported Greek G3 parts onto a Springfield receiver. The 2 I have seen had green furniture and were overall pretty high quality. I think they compare with the DSA & Enterprise FALs.
Top Top