Quoted: there is a metal push pin the you need to remove from the stock (cant remember if it is front or back) may need a punch to get it moving. once it is out, the metal receiver will come out of the stock. once this is out, take a Quarter and unscrew the back of the receiver. Slide the bolt assembly back some and take out the cocking/safety handle, now take the bolt all the way out. ok you have just stripped a Tec-9, pretty easy huh. That should cover it, i am going from memory.
|
Yup....
-make sure it's cocked (don't know why, but if I recall, it has to) & unloaded.
-push out pin in front
-lift up front and pull forward. Little pin in back of 'upper' will come out of hole (same hole that holds the strap hook)
-unscrew w/ quarter or large screw driver, keep control of cover
- slide bolt back to larger 'slot' location, pull out safety. Guts will slide out.
-reassemble backwards, making sure it is cocked, somthing to do w/ helping you put it back together.
-removing the extractor is not recommended
Same as posted......