Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/17/2002 3:04:16 PM EST
Link Posted: 3/17/2002 3:15:55 PM EST
[Last Edit: 3/17/2002 3:16:54 PM EST by lordtrader]
Link Posted: 3/17/2002 3:16:52 PM EST
LT, it is easy to remove. I just did the same thing as you described on your Glock. The trick is the pull forward on the slide and PULL the trigger at the same time. The problem is that the striker assembly is catching on the trigger group. I remember this trick from watching a local Glock Armorer do this my glock I practicing to taking it apart and putting back together. I forgot to put the barrel and slide the first time I was getting familiar with the pistol.
Link Posted: 3/17/2002 3:23:45 PM EST
[Last Edit: 3/17/2002 3:29:15 PM EST by AR18]
LT, I did not see that the barrel was in place. I did this a couple times to make sure the info I give works. if pulling foward and pressing on the trigger did not release the slide from the lower. Keep the trigger depress, leave the pistol in the normal cofiguration and pull down on the take down switch. This releases the slide from the frame with the barrel.
Link Posted: 3/17/2002 3:43:30 PM EST
[Last Edit: 3/17/2002 3:44:35 PM EST by lordtrader]
Link Posted: 3/17/2002 3:45:12 PM EST
LT - I just pulled the recoil spring out of my 3rd gen G19, and got mine to "lock up just like yours.

I aligned the slide with the frame, pulled the trigger, and mine came right back apart, no problemo.

It would not come apart without pulling the trigger tho. Mine did not hurt anything. Thats too bad about yours.
Link Posted: 3/17/2002 3:48:39 PM EST
Np, LT. Just give me your Glock instead. Just kidding.
Link Posted: 3/17/2002 3:58:03 PM EST
Link Posted: 3/17/2002 4:06:15 PM EST
Link Posted: 3/17/2002 4:28:06 PM EST
Top Top