Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Page / 81
Link Posted: 6/19/2018 9:14:57 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Sweet. Looks better than 31s.
Link Posted: 6/19/2018 9:17:12 PM EDT
Discussion ForumsJump to Quoted PostQuote History
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By brodband8:
Originally Posted By 4DoorEKk:
Any info on the new goggle for Marsoc/ Recon? They’re calling it the BNVD II. My guess is a Pvs-15 with WP tubes and a COTI. They mention the WP and COTI but no pics.
http://www.insighttechnology.com/l3-products/enhanced-night-vision-goggle-binocular-envg-b
That’s hot.
Link Posted: 6/20/2018 6:15:57 AM EDT
Welp. That's not gonna be cheap
Link Posted: 6/20/2018 7:28:44 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jpmuscle:
Welp. That's not gonna be cheap
View Quote
And probably not going to be available to the civilian market. Not that I could afford it.
Link Posted: 6/20/2018 9:02:41 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By jpmuscle:
Welp. That's not gonna be cheap
View Quote
Roughly $23,000 - not available to mortals.
Link Posted: 6/20/2018 9:30:13 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bcauz3y:

Roughly $23,000 - not available to mortals.
View Quote
Less expensive than the PSQ36 FGS and pivoting tubes vs the ANVIS style FGS.

Is the thermal sensor a 320 or 640?
Link Posted: 6/20/2018 9:38:22 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By blackghost:

Less expensive than the PSQ36 FGS and pivoting tubes vs the ANVIS style FGS.

Is the thermal sensor a 320 or 640?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By blackghost:

Less expensive than the PSQ36 FGS and pivoting tubes vs the ANVIS style FGS.

Is the thermal sensor a 320 or 640?
This is what I can find.

• Thermal sensor diagonal FOV greater than or equal to 34°.
• Thermal sensor frame rate greater than or equal to 60.0 Hz.
• Integrated full color microdisplay with active format greater than or equal to 1280x960.
Link Posted: 6/20/2018 11:15:37 AM EDT
[Last Edit: 6/20/2018 11:18:31 AM EDT by cjwwd2]
Discussion ForumsJump to Quoted PostQuote History
That is bad ass.

They did mention the thermal was clip on, where as that L3 one has it built in

ETA, If true that is $23k a pop that is a serious deal considering everything you're getting.
Link Posted: 6/20/2018 12:04:00 PM EDT
[Last Edit: 6/20/2018 4:07:23 PM EDT by CTM1]
Not that I have any direct experience with the PSQ-36 but based on what I read about the system it seemed flawed to me. The thermal was tied to the NV channel, meaning you had to run the NV to run the thermal. Now with the PSQ-20 it had a separate thermal channel, meaning you could use the thermal in a stand alone mode thus you could use it during the day or during that twilight period where you could not use NV. The other thing that seemed stupid about the PSQ-36 was that the unit was fixed, meaning you could not rotate the modules separately.

Now based on what I read this new ENVG does the smart thing in carrying over the separate thermal channel and incorporates the ability to rotate each NV module. The thing I did not like about the PSQ-20 was that it used a dedicated mount with power supply, and based on the picture of this new ENVG they are going the same route.

If I recall correctly it was one of the guys from at TNVC that said the military liked the 15's (Bino's) with the COTI as an add on so if something broke the entire system was not wasted. No idea if the military really cares about having the separate thermal channel. Now I cannot compare what I use NV/Thermal for with what the military uses it for, but based on my experience the separate thermal channel of the PSQ-20 is an incredibly handy feature to have.

Sorry as this string probably should have been a separate topic as this is a pic thread.
Link Posted: 6/20/2018 2:33:06 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By cjwwd2:

ETA, If true that is $23k a pop that is a serious deal considering everything you're getting.
View Quote
I think that's what the cost came out to be for the military contract on a per-item basis. I would expect the retail cost to be a little higher, but probably not significantly so.
Link Posted: 6/20/2018 8:32:31 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bcauz3y:

I think that's what the cost came out to be for the military contract on a per-item basis. I would expect the retail cost to be a little higher, but probably not significantly so.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bcauz3y:

I think that's what the cost came out to be for the military contract on a per-item basis. I would expect the retail cost to be a little higher, but probably not significantly so.
Originally Posted By bcauz3y:

I think that's what the cost came out to be for the military contract on a per-item basis. I would expect the retail cost to be a little higher, but probably not significantly so.
If you could get these for ~25 I’d probably buy a pair.. i’ve invested more than that over the years into separate thermal and NVG gear
Link Posted: 6/21/2018 8:10:54 AM EDT
Link Posted: 6/21/2018 8:13:22 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By TATBME:

Time to update that profile pic .
View Quote
Attachment Attached File

Link Posted: 6/22/2018 7:00:23 PM EDT
[Last Edit: 6/22/2018 7:02:34 PM EDT by TNVC_Augee]
Link Posted: 6/26/2018 6:19:08 PM EDT


SIG RATTLER W/ SIG OPTIC
TEAM WENDY
NIGHT LONG IND PVS14
SPIRITUS RIG
PROJEKT MONARK GLOW IN THE DARK PATCH
PRESAMPLE DEPOT PATCH

taken with Sony A7s2
Link Posted: 6/26/2018 6:33:52 PM EDT
[Last Edit: 6/26/2018 6:34:47 PM EDT by MrPlayer]
Attachment Attached File


Ops Core BASE jump S/M
Us Palm counterweight
UNV WP MOD3s w/dual gain
Norotos FTO hyper Mount
D3LLC D39SD Submachine Gun
W/Aimpoint Micro and ITAL laser
Link Posted: 6/26/2018 7:01:07 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By MrPlayer:
https://www.AR15.Com/media/mediaFiles/102939/C789839B-7C9E-4C49-AE34-11B16DC63885-588144.JPG

Ops Core BASE jump S/M
Us Palm counterweight
UNV WP MOD3s w/dual gain
Norotos FTO hyper Mount
D3LLC D39SD Submachine Gun
W/Aimpoint Micro and ITAL laser
View Quote
I don’t see any of the things on that list .
Link Posted: 6/26/2018 7:33:08 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By MrPlayer:
https://www.AR15.Com/media/mediaFiles/102939/C789839B-7C9E-4C49-AE34-11B16DC63885-588144.JPG

Ops Core BASE jump S/M
Us Palm counterweight
UNV WP MOD3s w/dual gain
Norotos FTO hyper Mount
D3LLC D39SD Submachine Gun
W/Aimpoint Micro and ITAL laser
View Quote
Best "helmet" pic yet
Link Posted: 6/27/2018 12:03:47 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By MrPlayer:
https://www.AR15.Com/media/mediaFiles/102939/C789839B-7C9E-4C49-AE34-11B16DC63885-588144.JPG

Ops Core BASE jump S/M
Us Palm counterweight
UNV WP MOD3s w/dual gain
Norotos FTO hyper Mount
D3LLC D39SD Submachine Gun
W/Aimpoint Micro and ITAL laser
View Quote
MkI butt cheeks
Link Posted: 6/27/2018 7:07:05 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By AZMAN42:
https://i.imgur.com/7qsRrK6l.jpg

SIG RATTLER W/ SIG OPTIC
TEAM WENDY
NIGHT LONG IND PVS14
SPIRITUS RIG
PROJEKT MONARK GLOW IN THE DARK PATCH
PRESAMPLE DEPOT PATCH

taken with Sony A7s2
View Quote
Dude, did you hydrodip your TW LTP?
Link Posted: 6/27/2018 9:10:59 AM EDT
Careful with the butt pics MrPlayer. The Sharia squad will snatch you up and send you to re-education camp.
Link Posted: 6/27/2018 12:03:57 PM EDT
[Last Edit: 6/27/2018 12:04:46 PM EDT by great308]
Got around to finally pulling my sordins apart to mount the unity MARK, kind of digging it.

Ops core shipped my maritime skeleton arc rails today so I’m going to finally chop it and modify the cover I have coming to fit.

Also waiting on my RNVG’s... lots of good stuff coming, love my expensive toys!

Link Posted: 6/27/2018 2:31:27 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By great308:
Got around to finally pulling my sordins apart to mount the unity MARK, kind of digging it.

Ops core shipped my maritime skeleton arc rails today so I’m going to finally chop it and modify the cover I have coming to fit.

Also waiting on my RNVG’s... lots of good stuff coming, love my expensive toys!

https://i.imgur.com/TqL5nNd.jpg
View Quote
Can't wait to see another maritime chopped carbon.
Link Posted: 6/27/2018 4:28:03 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By fivefivesixphoto:

Dude, did you hydrodip your TW LTP?
View Quote
I did not but the previous owner did, its MC black
Link Posted: 6/28/2018 5:33:26 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By AZMAN42:

I did not but the previous owner did, its MC black
View Quote
I totally had considered doing that! Does it seem to hold up pretty well?
Link Posted: 6/28/2018 9:42:13 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By brodband8:
Can't wait to see another maritime chopped carbon.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By brodband8:
Originally Posted By great308:
Got around to finally pulling my sordins apart to mount the unity MARK, kind of digging it.

Ops core shipped my maritime skeleton arc rails today so I’m going to finally chop it and modify the cover I have coming to fit.

Also waiting on my RNVG’s... lots of good stuff coming, love my expensive toys!

https://i.imgur.com/TqL5nNd.jpg
Can't wait to see another maritime chopped carbon.
Just hope it turns out straight
Link Posted: 6/30/2018 10:40:37 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bcauz3y:

Thank you!

I'm currently spec'ing out WP binos and a helmet w\trimmings. Sitting on about a $15k budget and just want to make sure I don't fuck it up and buy a bunch of stuff I'm going to hate.
View Quote
@bcauz3y

When can I come test drive those binos?

Link Posted: 6/30/2018 1:50:41 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By rlltd42:

@bcauz3y

When can I come test drive those binos?

View Quote
As soon as I buy them! My local range gave me the key to the gate and said "enjoy the night". We got free range as long as we're out by 9.
Link Posted: 6/30/2018 3:57:06 PM EDT
[Last Edit: 6/30/2018 4:22:53 PM EDT by rlltd42]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By bcauz3y:

As soon as I buy them! My local range gave me the key to the gate and said "enjoy the night". We got free range as long as we're out by 9.
View Quote
That's awesome! You know we're friends, right? Right??

I've been playing around with the idea of picking up another PVS-14 and having duals that way, then eventually doing the MOD-3 upgrade. Still not entirely sure what my long term plan is but I'm starting to get back into tinkering with night vision again.
Link Posted: 7/2/2018 8:12:43 PM EDT
This carbon is so sexy! Too bad I’m going to have to mod the cover once I chop the helmet. Maritime rails be here on Thursday

Link Posted: 7/2/2018 8:55:58 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By great308:
This carbon is so sexy! Too bad I'm going to have to mod the cover once I chop the helmet. Maritime rails be here on Thursday

https://i.imgur.com/tqt9fF1.jpg
View Quote


I was going to get a plain Mulitcam to match my gear but screw it. Tropic will still blend in
Link Posted: 7/3/2018 12:15:21 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PA-Minuteman:


I was going to get a plain Mulitcam to match my gear but screw it. Tropic will still blend in
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PA-Minuteman:
Originally Posted By great308:
This carbon is so sexy! Too bad I'm going to have to mod the cover once I chop the helmet. Maritime rails be here on Thursday

https://i.imgur.com/tqt9fF1.jpg


I was going to get a plain Mulitcam to match my gear but screw it. Tropic will still blend in
Tropic is sexy no doubt. It blends amazingly well.
Link Posted: 7/3/2018 10:22:31 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By rlltd42:

That's awesome! You know we're friends, right? Right??

I've been playing around with the idea of picking up another PVS-14 and having duals that way, then eventually doing the MOD-3 upgrade. Still not entirely sure what my long term plan is but I'm starting to get back into tinkering with night vision again.
View Quote
Well, it would be awesome to have a local buddy who likes to play with NVGs. One buddy moved away @redneckarmy34 and the other one @The_beer_slayer never accepts my range invitations.

So, I wrestled with the bridged 14s, and decided on binos because I knew I'd want them eventually anyway, so I'll reserve my 14s for a loaner and get what I'll end up buying anyway.

Pic thread: Not mine:

Link Posted: 7/4/2018 12:07:54 PM EDT
Link Posted: 7/5/2018 3:35:59 AM EDT
4th by J M, on Flickr
Link Posted: 7/5/2018 2:57:44 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By great308:
This carbon is so sexy! Too bad I'm going to have to mod the cover once I chop the helmet. Maritime rails be here on Thursday

https://i.imgur.com/tqt9fF1.jpg
View Quote
BTW what cover is that?

Doesn't the Carbon cover fit the Ops Bump helmets?
Link Posted: 7/5/2018 9:07:59 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PA-Minuteman:
BTW what cover is that?

Doesn't the Carbon cover fit the Ops Bump helmets?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PA-Minuteman:
Originally Posted By great308:
This carbon is so sexy! Too bad I'm going to have to mod the cover once I chop the helmet. Maritime rails be here on Thursday

https://i.imgur.com/tqt9fF1.jpg
BTW what cover is that?

Doesn't the Carbon cover fit the Ops Bump helmets?
It’s made by a company called UR-Tactical. They are out of China but put out pretty good quality stuff that is not copy’s for the most part. It’s for the ballistic helmet so you would have to go one size smaller. They only make a m/l and l/xl so if you have a M/L bump like my carbon is it will be a tiny bit lose as you can see in the picture but not that bad actually. It will fit the bump as said but for best fit order one size smaller.
Link Posted: 7/5/2018 9:17:02 PM EDT
[Last Edit: 7/5/2018 9:19:08 PM EDT by great308]
Thanks to brodband8 for giving me the little bit of extra courage to cut on a $600 helmet.

My ops core Skelton maritime rails came in today. Got the carbon all cut and edges sealed.

I modified the cover and pretty much pull the entire cover apart to mod it to fit the maritime. I also wish I had the right color loop on hand and will change it out later on. Not that the color matters as my manta covers the little patch completely.

More to follow... got to get my sordins on, secure the manta, and build a external battery pouch tomorrow. Will hopefully have it back up and running tomorrow.

I’m really digging the skeleton rails with ability to put zip ties through he arc rails.





Link Posted: 7/5/2018 9:36:35 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By great308:
Thanks to brodband8 for giving me the little bit of extra courage to cut on a $600 helmet.

My ops core Skelton maritime rails came in today. Got the carbon all cut and edges sealed.

I modified the cover and pretty much pull the entire cover apart to mod it to fit the maritime. I also wish I had the right color loop on hand and will change it out later on. Not that the color matters as my manta covers the little patch completely.

More to follow... got to get my sordins on, secure the manta, and build a external battery pouch tomorrow. Will hopefully have it back up and running tomorrow.

I’m really digging the skeleton rails with ability to put zip ties through he arc rails.

https://i.imgur.com/PUAv18r.jpg
https://i.imgur.com/VSpzrtO.jpg
https://i.imgur.com/vMSB2Xw.jpg
https://i.imgur.com/k5brKAk.jpg
https://i.imgur.com/Tifef2l.jpg
View Quote
Looking good bro
Link Posted: 7/5/2018 10:26:50 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By great308:
Thanks to brodband8 for giving me the little bit of extra courage to cut on a $600 helmet.

My ops core Skelton maritime rails came in today. Got the carbon all cut and edges sealed.

I modified the cover and pretty much pull the entire cover apart to mod it to fit the maritime. I also wish I had the right color loop on hand and will change it out later on. Not that the color matters as my manta covers the little patch completely.

More to follow... got to get my sordins on, secure the manta, and build a external battery pouch tomorrow. Will hopefully have it back up and running tomorrow.

I’m really digging the skeleton rails with ability to put zip ties through he arc rails.

https://i.imgur.com/PUAv18r.jpg
https://i.imgur.com/VSpzrtO.jpg
https://i.imgur.com/vMSB2Xw.jpg
https://i.imgur.com/k5brKAk.jpg
https://i.imgur.com/Tifef2l.jpg
View Quote
That look's great, I'd like to do the same to my carbon. What did you use to cut and seal the edges?
Link Posted: 7/6/2018 1:18:33 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By ECPrevatte:
https://farm1.staticflickr.com/880/41904533805_9123d7658b_b.jpg

Switched to a maritime. Now it's a lot better with Peltors flipped down for me personally.

Parts:

- Sentinels by Nightlong Industries
- Ops Core Maritime
- Custom Counterweight/battery holster
- S&S Manta
- Peltor Comtacs
- Wilcox GSGM
View Quote
Do you like the Wilcox mount? Because I have the exact same setup for my sents, and I personally friggin' hate it. I'd much rather run the 15's with the g24 any night of the week. Unless, of course, I needed something that would last a few days without running out of battery, but I can't think of any situations where an external battery pack is really a necessity for me, considering I can just reach into my bag and pull out another AA battery if the 15's die on me. The paper/steel targets never seem to mind.
Link Posted: 7/6/2018 1:40:03 AM EDT
I don't really care for either or setup.

I am going to grab one of those low profile mounts made for the Aussie's GSGMs to bring the sentinels back closer to my eyes.
Link Posted: 7/6/2018 1:51:30 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By ECPrevatte:
I don't really care for either or setup.

I am going to grab one of those low profile mounts made for the Aussie's GSGMs to bring the sentinels back closer to my eyes.
View Quote
I really liked having my PVS-15 really close to my eyes with the eye cups occluding peripheral vision. Until I used them while running and they fogged up almost immediately. Wiping off the close lenses while they're mounted to a helmet isn't easy or particularly effective.
Link Posted: 7/6/2018 7:35:11 AM EDT
[Last Edit: 7/6/2018 7:35:30 AM EDT by great308]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By eMc9001:
That look's great, I'd like to do the same to my carbon. What did you use to cut and seal the edges?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By eMc9001:
Originally Posted By great308:
Thanks to brodband8 for giving me the little bit of extra courage to cut on a $600 helmet.

My ops core Skelton maritime rails came in today. Got the carbon all cut and edges sealed.

I modified the cover and pretty much pull the entire cover apart to mod it to fit the maritime. I also wish I had the right color loop on hand and will change it out later on. Not that the color matters as my manta covers the little patch completely.

More to follow... got to get my sordins on, secure the manta, and build a external battery pouch tomorrow. Will hopefully have it back up and running tomorrow.

I’m really digging the skeleton rails with ability to put zip ties through he arc rails.

https://i.imgur.com/PUAv18r.jpg
https://i.imgur.com/VSpzrtO.jpg
https://i.imgur.com/vMSB2Xw.jpg
https://i.imgur.com/k5brKAk.jpg
https://i.imgur.com/Tifef2l.jpg
That look's great, I'd like to do the same to my carbon. What did you use to cut and seal the edges?
I used these in the picture below, mostly what was suggest to me. The real thin fine cutoff disks that don’t have the fiber in them. I cut just short of my marks and used a 120g sanding drum to finish it to the marks. Little bit of superfine wet type sand paper by hand to make the edges perfect. I got a little lazy on sealing, I thought I had poly resin around but must of ran out of it. I used gel superglue and a little air cure cerakote on the edges. If it wears through the super glue I’ll just lightly sand and add resin or even epoxy down the road. The edges I did with tape to make the line perfect, that way if I messed it up or wanted it tighter I could just take the tape off and start again. Afterwords I maked the edge of the tape with a very fine point sharpie, removed the tape and went to town. I just went slow to get it as perfect as I could.

Link Posted: 7/6/2018 8:48:12 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By great308:

I used these in the picture below, mostly what was suggest to me. The real thin fine cutoff disks that don’t have the fiber in them. I cut just short of my marks and used a 120g sanding drum to finish it to the marks. Little bit of superfine wet type sand paper by hand to make the edges perfect. I got a little lazy on sealing, I thought I had poly resin around but must of ran out of it. I used gel superglue and a little air cure cerakote on the edges. If it wears through the super glue I’ll just lightly sand and add resin or even epoxy down the road. The edges I did with tape to make the line perfect, that way if I messed it up or wanted it tighter I could just take the tape off and start again. Afterwords I maked the edge of the tape with a very fine point sharpie, removed the tape and went to town. I just went slow to get it as perfect as I could.

https://i.imgur.com/amKzqlM.jpg
View Quote
Cool, thank's for the info man. Thinking it would be a nice weekend project and I much prefer the supercut look anyhow. Rather get it over with before all my part's come in so I don't have to set it up twice lol.
Link Posted: 7/6/2018 10:42:00 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By eMc9001:
Cool, thank's for the info man. Thinking it would be a nice weekend project and I much prefer the supercut look anyhow. Rather get it over with before all my part's come in so I don't have to set it up twice lol.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By eMc9001:
Originally Posted By great308:

I used these in the picture below, mostly what was suggest to me. The real thin fine cutoff disks that don’t have the fiber in them. I cut just short of my marks and used a 120g sanding drum to finish it to the marks. Little bit of superfine wet type sand paper by hand to make the edges perfect. I got a little lazy on sealing, I thought I had poly resin around but must of ran out of it. I used gel superglue and a little air cure cerakote on the edges. If it wears through the super glue I’ll just lightly sand and add resin or even epoxy down the road. The edges I did with tape to make the line perfect, that way if I messed it up or wanted it tighter I could just take the tape off and start again. Afterwords I maked the edge of the tape with a very fine point sharpie, removed the tape and went to town. I just went slow to get it as perfect as I could.

https://i.imgur.com/amKzqlM.jpg
Cool, thank's for the info man. Thinking it would be a nice weekend project and I much prefer the supercut look anyhow. Rather get it over with before all my part's come in so I don't have to set it up twice lol.
You bet! Its worth it I think already and worth it to get it done before the on set it all up. It was about an hour project for just the shell mods, the cover stuff is a different story.
Link Posted: 7/6/2018 11:16:34 AM EDT
[Last Edit: 7/6/2018 11:17:14 AM EDT by eMc9001]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By great308:

You bet! Its worth it I think already and worth it to get it done before the on set it all up. It was about an hour project for just the shell mods, the cover stuff is a different story.
View Quote
You think it would be better to get a cover that's meant for the FAST then? Been looking at First Spear, Perroz, and the Wendy LTP.

Edit: shooting you a PM as well.
Link Posted: 7/6/2018 7:41:37 PM EDT
[Last Edit: 7/6/2018 7:42:07 PM EDT by DallasLooterShooter]
What’s the best bargain ear pro to use on a helmet? I have an old pair of Howard Leight impact sports, and some TW Peltor adapters on the way, but I’m wondering if I should spring for a $100 pair of Peltor sport Tacticals instead of trying to make the HL IS work.

Not interested in spending more than approx $100...
Link Posted: 7/6/2018 7:44:53 PM EDT
[Last Edit: 7/6/2018 7:59:05 PM EDT by rlltd42]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By DallasLooterShooter:
What’s the best bargain ear pro to use on a helmet? I have an old pair of Howard Leight impact sports, and some TW Peltor adapters on the way, but I’m wondering if I should spring for a $100 pair of Peltor sport Tacticals instead of trying to make the HL IS work.

Not interested in spending more than approx $100...
View Quote
Peltor tactical pros sell used on eBay regularly for $50-$60

ETA: Peltor tactical pros on a helmet. Not as nice as comtacs but easier to use with consumer grade 2 way radios.

Attachment Attached File
Link Posted: 7/6/2018 8:18:33 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By rlltd42:

Peltor tactical pros sell used on eBay regularly for $50-$60

ETA: Peltor tactical pros on a helmet. Not as nice as comtacs but easier to use with consumer grade 2 way radios.

https://www.AR15.Com/media/mediaFiles/44277/Screen_Shot_2018-07-06_at_6-599512.JPG
View Quote
Thanks, I set up a saved search on eBay to keep an eye out.
Page / 81
Top Top