User Panel
[#1]
|
|
|
[#2]
Originally Posted By TechOps:
I got in the shop and started tearing apart my helmet and some Leights. Cut the metal band and leads and removed all my helmet rails. Theres about 1.5" of metal band drilled & double bolted under the rail now. I rewired and tucked the wires back up. Everything function checks and fits tight with no movement. I think it came out pretty clean. https://www.AR15.Com/media/mediaFiles/361596/IMG-6200-168382.JPGhttps://www.AR15.Com/media/mediaFiles/361596/IMG-6203-168386.JPG The only thing I did notice is the chin strap bands do tend to get inbetween the muff and my ear a little. They are flat against my face so it's not really effecting much. How do you guys get around this? View Quote I don't have any issues with noise, because I wear surefire sonic defenders under the muffs whenever I use helmet mounted muffs -- because they always seem to hurt my hearing otherwise. |
|
|
[#3]
Originally Posted By awptickes:
I don't. I just bent the metal arms to make them seal as best as I can. If I know I'm going to be shooting more than a couple rounds, I'll re-arrange the straps and change length so they run OVER the muffs. I don't have any issues with noise, because I wear surefire sonic defenders under the muffs whenever I use helmet mounted muffs -- because they always seem to hurt my hearing otherwise. View Quote |
|
|
[Last Edit: Augee]
[#4]
Originally Posted By RJC1977:
Who makes that helmet cover Augee? I am looking for one just like that View Quote TYR Tactical ~Augee |
|
|
[Last Edit: TechOps]
[#5]
Originally Posted By Augee:
You answered your own question in the quote. http://i1239.photobucket.com/albums/ff502/augeekim/F07AC2A2-067D-427D-97B8-6F74EA1DCAA4_zpsbtfdszdb.jpg TYR Tactical ~Augee View Quote @Augee |
|
|
[#6]
|
|
|
[Last Edit: Doc_Hurley]
[#7]
|
|
you would be strong too if you grew up on prison island, where first base is a brass knuckle and second base is anal. - CWG
ARFCOM Nickname - Dozer |
[#8]
Originally Posted By Doc_Hurley:
I finally got a good deal on a ballistic highcut, mostly because it was black. But my krylon skill know no bounds. Also got a great deal on a TNVC helmet dickmod. Balances really well now. And finally got to put the cover @augee sold me ages ago on a real helmet. https://www.AR15.Com/media/mediaFiles/243409/IMG-20170320-150253-335-170301.jpg View Quote |
|
Here I am, Here I remain
|
[#9]
lol sorry Augee I was not paying attention
|
|
|
[Last Edit: actuallyambrose]
[#10]
edit
|
|
|
[#11]
|
|
|
[#13]
Originally Posted By AR167:
My first PVS-14 and helmet setup. Still learning figuring out the wants vs needs. TNVC put me on the right track though. The white phos image is unbelievable for what I need vs the rifle mounted Flir that I have as well. I now see what all the bitching is about the J-Arm. Seems like a cheap pos compared to the optic it's holding. Great info in this section of the forum. https://www.AR15.Com/media/mediaFiles/123343/IMG-5624-172028.jpg View Quote |
|
|
[#14]
Originally Posted By NothingClever:
I might be wrong but your admin light is on upside down I think. Not that it matters. It still works. But the battery compartment looks like it might cover a patch you out on the Velcro behind it. View Quote Thanks for the insight. Trying to get some hog blood on this setup tonight.... |
|
Waste no day
|
[#15]
Originally Posted By techspy:
I just picked up an NVM14 for half retail NIB and got it mounted. It uses a different mount than standard issue J-Arm etc but I was able to tap the mount on the monocle and it works great! I have a weapon mount on the way as well. Man I wish the flip to the side mount wasn't so expensive!! Anyway, I do have a couple questions. Most of my optics are NV capable but I use my NV on my off eye. It works great except that I can not get a sight picture with the NV deployed. The end of the NV touches mt weapon and prevents me from getting a good sight picture through my optic. I can easily retract the NV and carry on (my helmet and Comtacs don't interfere.) So what is the SOP on this? What is the most practical way to go from NV operations to a solid target acquisition? FYI, I have this issue on many different platforms, from subguns (MP5, UMP, M10) to carbines (AK, AR, G3, Aug, Tavor etc) so I don't think it is that. Perhaps it requires an artificially high mounted optic? Thanks! Also, can someone tell me why my linked images show up as a link instead of an image? I used the "insert image" option. https://static.rcgroups.net/forums/attachments/2/2/3/2/5/1/a9622404-213-NOG%20%281%29.jpg https://static.rcgroups.net/forums/attachments/2/2/3/2/5/1/a9622405-102-NOG%20%282%29.jpg View Quote |
|
|
[#16]
Originally Posted By AR167:
My first PVS-14 and helmet setup. Still learning figuring out the wants vs needs. TNVC put me on the right track though. The white phos image is unbelievable for what I need vs the rifle mounted Flir that I have as well. I now see what all the bitching is about the J-Arm. Seems like a cheap pos compared to the optic it's holding. Great info in this section of the forum. https://www.AR15.Com/media/mediaFiles/123343/IMG-5624-172028.jpg View Quote |
|
Here I am, Here I remain
|
[#17]
Originally Posted By AR167:
It's definitely possible lol but since I'm a shifty lefty I needed it on the right side. All of the attachment points and styles are so foreign to me that I just put the sumbitch where I needed it. Thanks for the insight. Trying to get some hog blood on this setup tonight.... View Quote |
|
|
[#18]
|
|
Waste no day
|
[#19]
Originally Posted By AR167:
Bah! Will that fit the helmet I have? Ops-Core Fast Bump? Guessing no. View Quote View All Quotes View All Quotes |
|
|
[#20]
Originally Posted By awptickes:
It's what I run. Go back a page or two, you'll see my setup. FAST Bump, Norotos DDA and AKA2 arm. Worlds better than the J-Arm and Rhino mount, no rattle, and it locks in all positions. AND you get a halfway-up detent for when you're in and out of vehicles. View Quote View All Quotes View All Quotes Originally Posted By awptickes:
Originally Posted By AR167:
Originally Posted By lilMAC25:
Now you need a Norotos DDA and a Dovetail Mount. https://tnvc.com/shop/norotos-aka2-mount-w-interchangeable-interface-sockets/ |
|
Here I am, Here I remain
|
[#21]
Good god I thought restoring my 51 chevy was a money pit. Lol. Thanks for the help!!!!
|
|
Waste no day
|
[#22]
|
|
Here I am, Here I remain
|
[#23]
Originally Posted By terrance250:
The Norotos INVG is pretty slick for a PVS 14, especially coupled with the Norotos dual dovetail. I really like the way it gives you the ability to stow the PVS 14 so tightly against your helmet when not in use. https://www.youtube.com/watch?v=b5WtcZmTuYU View Quote |
|
|
[#24]
Originally Posted By NothingClever:
That mount makes me hard. Wish it wasn't so frackin much. View Quote View All Quotes View All Quotes Originally Posted By NothingClever:
Originally Posted By terrance250:
The Norotos INVG is pretty slick for a PVS 14, especially coupled with the Norotos dual dovetail. I really like the way it gives you the ability to stow the PVS 14 so tightly against your helmet when not in use. https://www.youtube.com/watch?v=b5WtcZmTuYU |
|
Here I am, Here I remain
|
[#25]
Originally Posted By lilMAC25:
It is pretty damn nice. View Quote View All Quotes View All Quotes Originally Posted By lilMAC25:
Originally Posted By NothingClever:
Originally Posted By terrance250:
The Norotos INVG is pretty slick for a PVS 14, especially coupled with the Norotos dual dovetail. I really like the way it gives you the ability to stow the PVS 14 so tightly against your helmet when not in use. https://www.youtube.com/watch?v=b5WtcZmTuYU |
|
you would be strong too if you grew up on prison island, where first base is a brass knuckle and second base is anal. - CWG
ARFCOM Nickname - Dozer |
[Last Edit: Sogan]
[#26]
Originally Posted By NothingClever:
That mount makes me hard. Wish it wasn't so frackin much. View Quote View All Quotes View All Quotes Originally Posted By NothingClever:
Originally Posted By terrance250:
The Norotos INVG is pretty slick for a PVS 14, especially coupled with the Norotos dual dovetail. I really like the way it gives you the ability to stow the PVS 14 so tightly against your helmet when not in use. https://www.youtube.com/watch?v=b5WtcZmTuYU |
|
|
[#27]
Originally Posted By Doc_Hurley:
Adams SAM is mo bettah. View Quote View All Quotes View All Quotes Originally Posted By Doc_Hurley:
Originally Posted By lilMAC25:
Originally Posted By NothingClever:
Originally Posted By terrance250:
The Norotos INVG is pretty slick for a PVS 14, especially coupled with the Norotos dual dovetail. I really like the way it gives you the ability to stow the PVS 14 so tightly against your helmet when not in use. https://www.youtube.com/watch?v=b5WtcZmTuYU Of course... I still don't have one. ~Augee |
|
|
[#28]
Originally Posted By Doc_Hurley:
Adams SAM is mo bettah. View Quote View All Quotes View All Quotes Originally Posted By Doc_Hurley:
Originally Posted By lilMAC25:
Originally Posted By NothingClever:
Originally Posted By terrance250:
The Norotos INVG is pretty slick for a PVS 14, especially coupled with the Norotos dual dovetail. I really like the way it gives you the ability to stow the PVS 14 so tightly against your helmet when not in use. https://www.youtube.com/watch?v=b5WtcZmTuYU |
|
Here I am, Here I remain
|
[#29]
So, what's the deal with the ANVIS ground mount vs a typical dovetail?
What makes it "better" for goggles/binocular NV? |
|
|
[#30]
Originally Posted By awptickes:
So, what's the deal with the ANVIS ground mount vs a typical dovetail? What makes it "better" for goggles/binocular NV? View Quote The dovetail is less complicated overall, due to lack of wires and remote stuff. But then you have to hang weight on the back, and unless you're stashing extra batteries, its weight that doesn't have a second purpose and in my mind is useless. |
|
you would be strong too if you grew up on prison island, where first base is a brass knuckle and second base is anal. - CWG
ARFCOM Nickname - Dozer |
[#31]
Originally Posted By Doc_Hurley:
ANVIS allows the use of a remote battery pack, which also acts as a counterweight. The part I like the most is the automatic on/off when the NODs are pulled down or stowed. The dovetail is less complicated overall, due to lack of wires and remote stuff. But then you have to hang weight on the back, and unless you're stashing extra batteries, its weight that doesn't have a second purpose and in my mind is useless. View Quote My counterweight pack is full of lithium batteries, it's just enough to make it work to balance out. Guess it is what I thought it was... an older tech designed for stuff that the PVS-31, DTNVG, Mod-3, and Sentinels don't really need. |
|
|
[#32]
Originally Posted By awptickes:
The "new" goggle designs use only a single CR123a, so, I don't really get it. I guess if you already have the anvis battery pack, and want to put more weight on your neck it's a cool idea. Auto-off is cool, but auto-on is cooler. My counterweight pack is full of lithium batteries, it's just enough to make it work to balance out. Guess it is what I thought it was... an older tech designed for stuff that the PVS-31, DTNVG, Mod-3, and Sentinels don't really need. View Quote View All Quotes View All Quotes Originally Posted By awptickes:
Originally Posted By Doc_Hurley:
ANVIS allows the use of a remote battery pack, which also acts as a counterweight. The part I like the most is the automatic on/off when the NODs are pulled down or stowed. The dovetail is less complicated overall, due to lack of wires and remote stuff. But then you have to hang weight on the back, and unless you're stashing extra batteries, its weight that doesn't have a second purpose and in my mind is useless. My counterweight pack is full of lithium batteries, it's just enough to make it work to balance out. Guess it is what I thought it was... an older tech designed for stuff that the PVS-31, DTNVG, Mod-3, and Sentinels don't really need. The LPBP that powers my NODs is no heavier than your counterweight pack full of batteries, it powers longer and gives me a lot of versatility. I can hang Sentinels, AVS-6/9, GPNVGs, and host of other NODs without equipment swaps. And power them all from 4 AA batteries. It may be older tech, but it powering the newest stuff in NV, and it's pretty damn effective. |
|
you would be strong too if you grew up on prison island, where first base is a brass knuckle and second base is anal. - CWG
ARFCOM Nickname - Dozer |
[#33]
Another couple of points about the ANVIS-format mount that DocHurley hasn't pointed out, though I'm in agreement with him on the other advantages are:
1. ANVIS ball-dentent mounts stow extremely low profile, with most goggles, they will not fold higher than your helmet height, albeit they accomplish this by projecting the device out a little bit further. Because of the relatively low weight of the ANVIS, however, it's not as much of an issue as it might be with heavier devices, though once you get into things like Sentinels, much less some of the other more advanced systems that use the mount, it becomes more of a moot point. Also, because in front of your face is typically your "work space" that is kept free anyways, NVGs further forward are less of an issue than NVGs that are too tall when stowed. That low profile stowage can be extremely important if you're doing a lot of work around vehicles or in structures with low ceilings/obstacles that you don't want to get your NODs caught on. Ultimately, there is no way for a dovetail or bayonet mount to stow any lower than on a ball detent mount--there's simply too much going on. The natural counter to that would be that stowing/folding goggles like the BNVD or PVS-31 can be folded up against the helmet to provide a lower profile--and this is true, but it also means that each time you flip the NODs down, you need to re-adjust them for IPD, instead of the simple "drop down, NODs on" that the ball-detent mount provides. This also leads into another thing I like about ball-detent format devices, except for elevation--all adjustments on an ANVIS-format device are self-contained on the device. You can control tilt, eye relief, and IPD and leave it all set on the device, and they're less likely to get mis-adjusted, mis-aligned, or knocked out of position during storage or use. 2. All ball-detent devices have a built in breakaway by virtue of the way it is designed, unless the mount has been specifically modified/designed to preclude that possibility. While some mounts like the G24 and Norotos Hypers have breakaway features, most do not. While no one wants to drop their NVGs and have them breakaway from the mount, in some situations or circumstances, that's exactly what you want, as the breakaway can prevent more severe neck and/or spine injuries by breaking away, this can be especially more important with heavier devices now using ball-detent mounts, such as the GPNVG and AN/PSQ-36, though most of do not have access to such devices. Needless to say, they were designed this way, as they were designed for aviation use. For ground use, again, no one wants to drop their NODs, but also no one wants to fall out out of a helicopter or crash a vehicle/ATV, but if you must, it helps to reduce the chances you'll snap your neck because of the device mounted to it, better a broken set of NODs than a wheelchair, and depending on the severity, there's a good chance the NODs may still be functional afterwards if you still are--you just pop 'em back in. ~Augee |
|
|
[Last Edit: OperatorX]
[#34]
|
|
what's with you boy? think hard. a tattooed body to hide who you are? scared to be honest? to be yourself? a cowardly man.
|
[#35]
I've had both dovetail, and anvis ball detent mounts. I first ran pvs14s using the dovetail, then upgraded to a pair of sentinels and stuck with my g24 and ran dovetail. I then upgraded to an adams industries SAM mount and moved to ball detent. What an advantage. I found the power on/off feature of the anvis mount very helpful and ran my sentinels exclusively with an external anvis pack as a counter weight. That was until.... The fucking anvis folded down when I jumped off the back of a truck under full bungie cord tension and I was smacked in both eye sockets by my sentinels.
I have since went back to a wilcox g24. Upgraded to the dtnvg, and couldn't be happier. I still retained the power on/off features of an anvis mount by going to dtnvg since they operate much like a pvs-31, but.... it's now using dovetail. The stowage options are much more low profile than my sentinels and anvis mounts also. |
|
|
[Last Edit: NothingClever]
[#36]
Originally Posted By OperatorX:
Working my way to a dual tube set-up. Just waiting for @tnvc to get my other pvs-14 shipped out. https://www.AR15.Com/media/mediaFiles/358471/image-174878.jpg https://www.AR15.Com/media/mediaFiles/358471/image-174882.jpg Boa retention is mo betta than the occ dial. https://www.AR15.Com/media/mediaFiles/358471/image-174880.jpg https://www.AR15.Com/media/mediaFiles/358471/image-174879.jpg View Quote Then I see these damn duals. Damn you guys. I know what's going to happen. Sometime in the somewhat near future, out of nowhere, I'll get a bug up my ass and have to blow a bunch of money on duals. No freeloading: |
|
|
[#37]
|
|
|
[#38]
Originally Posted By xLucidx:
not as fancy as some of you guys but it serves me well. on the other side is a TLR1 for white light. http://i12.photobucket.com/albums/a218/xXLucidXx/helmet_zpsfjyqdykb.jpg View Quote How do you like that scout unit? |
|
|
[#39]
|
|
|
[#40]
|
|
you would be strong too if you grew up on prison island, where first base is a brass knuckle and second base is anal. - CWG
ARFCOM Nickname - Dozer |
[#41]
Originally Posted By brodband8:
I've had both dovetail, and anvis ball detent mounts. I first ran pvs14s using the dovetail, then upgraded to a pair of sentinels and stuck with my g24 and ran dovetail. I then upgraded to an adams industries SAM mount and moved to ball detent. What an advantage. I found the power on/off feature of the anvis mount very helpful and ran my sentinels exclusively with an external anvis pack as a counter weight. That was until.... The fucking anvis folded down when I jumped off the back of a truck under full bungie cord tension and I was smacked in both eye sockets by my sentinels. I have since went back to a wilcox g24. Upgraded to the dtnvg, and couldn't be happier. I still retained the power on/off features of an anvis mount by going to dtnvg since they operate much like a pvs-31, but.... it's now using dovetail. The stowage options are much more low profile than my sentinels and anvis mounts also. View Quote To be fair, I don't know the exact specs for either the SAM or the Sentinel, so maybe they're different, and the Sentinel is heavier than the AN/AVS-6/9, so the may require less force to break away--but the stated specs for the automatic breakaway for the ANVIS are 10-15gs fore and aft, and 9gs side to side. Not that I believe that all mounts are always exactly up to this spec--but they should not break free when properly mounted, locked, and stowed when jumping from the tailgate of a truck. It's a moot point now, since you're running the DTNVG, but it's possible to mount a device in the ball-detent cock-eyed to where by feel, you think it's locked in, but it's actually not properly, especially with bungees taking up all the slack, and it turns out they were not in right and end falling, or even locking in as they fall into deployed position... ask me how I know. ~Augee |
|
|
[#42]
Originally Posted By Augee:
This sounds incorrect to me. Not that it happened, but something sounds like it was not as it should be. To be fair, I don't know the exact specs for either the SAM or the Sentinel, so maybe they're different, and the Sentinel is heavier than the AN/AVS-6/9, so the may require less force to break away--but the stated specs for the automatic breakaway for the ANVIS are 10-15gs fore and aft, and 9gs side to side. Not that I believe that all mounts are always exactly up to this spec--but they should not break free when properly mounted, locked, and stowed when jumping from the tailgate of a truck. It's a moot point now, since you're running the DTNVG, but it's possible to mount a device in the ball-detent cock-eyed to where by feel, you think it's locked in, but it's actually not properly, especially with bungees taking up all the slack, and it turns out they were not in right and end falling, or even locking in as they fall into deployed position... ask me how I know. ~Augee View Quote View All Quotes View All Quotes Originally Posted By Augee:
Originally Posted By brodband8:
I've had both dovetail, and anvis ball detent mounts. I first ran pvs14s using the dovetail, then upgraded to a pair of sentinels and stuck with my g24 and ran dovetail. I then upgraded to an adams industries SAM mount and moved to ball detent. What an advantage. I found the power on/off feature of the anvis mount very helpful and ran my sentinels exclusively with an external anvis pack as a counter weight. That was until.... The fucking anvis folded down when I jumped off the back of a truck under full bungie cord tension and I was smacked in both eye sockets by my sentinels. I have since went back to a wilcox g24. Upgraded to the dtnvg, and couldn't be happier. I still retained the power on/off features of an anvis mount by going to dtnvg since they operate much like a pvs-31, but.... it's now using dovetail. The stowage options are much more low profile than my sentinels and anvis mounts also. To be fair, I don't know the exact specs for either the SAM or the Sentinel, so maybe they're different, and the Sentinel is heavier than the AN/AVS-6/9, so the may require less force to break away--but the stated specs for the automatic breakaway for the ANVIS are 10-15gs fore and aft, and 9gs side to side. Not that I believe that all mounts are always exactly up to this spec--but they should not break free when properly mounted, locked, and stowed when jumping from the tailgate of a truck. It's a moot point now, since you're running the DTNVG, but it's possible to mount a device in the ball-detent cock-eyed to where by feel, you think it's locked in, but it's actually not properly, especially with bungees taking up all the slack, and it turns out they were not in right and end falling, or even locking in as they fall into deployed position... ask me how I know. ~Augee |
|
|
[Last Edit: Augee]
[#43]
Originally Posted By TinyCrumb:
I don't think he was saying they broke free. I think he was saying they "folded down" i.e., came out of the stowed position into the "active" position. If that happened unintentionally and it was under bungee pressure *and* you have them set relatively close to your face that would smack the sh** out of your eye. Ouch. View Quote The "lock" and breakaway also applies to the force needed to break it free from the locked position with the mechanism engaging the grooves on the ball detent mount. ::shrug:: Point is, it obviously happened, hahaha, I'm not doubting that. My point is that it shouldn't have. At the same time, both the Sentinel and the SAM, while quite robust, and designed with military use in mind, they're still commercial products, so they're not necessarily governed by MIL-SPECs, so that's a possibility. However, and this is nothing against brodband, we all make foibles from time to time--operator error is usually the more-likely cause of malfunctions compared to equipment failure. Whether it was operator error, or he just got lemons, or they're not adequately rated/built--my point is that this shouldn't happen, and your NODs smacking you in the face while jumping off a truck should not be an expectation of the system, hahaha. ~Augee |
|
|
[Last Edit: NothingClever]
[#44]
|
|
|
[Last Edit: brodband8]
[#45]
It was properly locked in. I jumped off the bed of a truck down a small incline. (probably 6-7 feet.) I had the goggle stowed in the normal flipped upward position. I'm guessing the SAM mount was slightly worn as I had used it a bunch, but who knows. I won't ever go back to anvis ball because of it lol.
and for the record, the goggle didn't pop out of the ball detent mount, it completely folded down past the limit of travel and hit me right in the eye socket. I wasn't running the (OPS) spacer and had my anvis mount on the sentinels set with as much forward cant as it would go. |
|
|
[Last Edit: brodband8]
[#46]
double post
|
|
|
[#47]
Originally Posted By Texasmusic:
I have less than $150 in this one, as pictured. http://i.imgur.com/E4OmA4H.jpg http://i.imgur.com/Tx3iKLl.jpg View Quote I'm stealing the Velcro on the lenscap idea. |
|
|
[#48]
Originally Posted By TechOps:
Nice! How do you like that scout unit? View Quote View All Quotes View All Quotes Originally Posted By TechOps:
Originally Posted By xLucidx:
not as fancy as some of you guys but it serves me well. on the other side is a TLR1 for white light. http://i12.photobucket.com/albums/a218/xXLucidXx/helmet_zpsfjyqdykb.jpg How do you like that scout unit? for what it can do and the price point, its pure awesome. my main purpose for it is a quick "detection" scan then I use nods to ID. no trouble picking up deer at 150-175 yards. works great for a quick scan of a hillside and fields. I would put the ID range of it at around 75-100 yards depending on the animal. |
|
|
[#49]
Ok, you guys have convinced me, AN/AVS-9 style ball-mount may be the way I'll go for sentinels.
|
|
|
[#50]
Its the only way to roll, bruh.
|
|
you would be strong too if you grew up on prison island, where first base is a brass knuckle and second base is anal. - CWG
ARFCOM Nickname - Dozer |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.