Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 7/18/2005 11:27:58 PM EDT
[Last Edit: 8/23/2005 7:01:06 PM EDT by LArifleMAN]
Finally found a Federal Ordanance underfolder on the EE last week and I had a bit of a project in mind for it.




I already had one 10/22 so I went down to the local pawnshop and picked up another one in awesome shape for $100 even.
I'm going to have a bull barrel cut down to 11.5" and a 5.5" AR FS permenantly attached. I know this serves no locical purpose whatsoever but it will look dammed cool.

How should I go about channeling this stock for the larger barrel...Dremel?
Link Posted: 7/19/2005 12:00:13 AM EDT
You can use a wooden dowel to open up the barrel channel.
Start with 40/60 grit paper wrapped around the dowel, and when you get close to being done, switch to a fine grit like 100 and then 220.

Just pay attention to what you're doing, you don't want to end up with a angled channel... keep the dowel straight, and up/away from the rear sight area of the stock until you are using the fine sand paper.

Try searching for a guide at google or RFC. I'm sure you'll get a better guide from them.


(BTW, I posted the same thing in your thread in GD)
Link Posted: 7/19/2005 5:17:02 AM EDT
What are those stocks worth at this point in time?
Link Posted: 7/19/2005 6:54:30 AM EDT

Originally Posted By ToeTag:
What are those stocks worth at this point in time?



$75
Link Posted: 7/19/2005 2:17:37 PM EDT

Originally Posted By LArifleMAN:

Originally Posted By ToeTag:
What are those stocks worth at this point in time?



$75



If you got it for $75-, you got a great price! I think I paid like $125- for mine.
Link Posted: 7/19/2005 6:51:28 PM EDT

Originally Posted By ToeTag:

Originally Posted By LArifleMAN:

Originally Posted By ToeTag:
What are those stocks worth at this point in time?



$75



If you got it for $75-, you got a great price! I think I paid like $125- for mine.


I paid $100 for mine. But it had a clean 5-digit '66 10/22 mounted in it at the time!
Link Posted: 7/20/2005 4:50:24 AM EDT
that looks nice!

as stated i would use a dowel with sandpaper and slowing work the opening for the barrel.

is there a link to where i could find one of those setups?
Link Posted: 7/20/2005 7:31:21 AM EDT

Originally Posted By ToeTag:

Originally Posted By LArifleMAN:

Originally Posted By ToeTag:
What are those stocks worth at this point in time?



$75



If you got it for $75-, you got a great price! I think I paid like $125- for mine.


I've seen them listed on AA for ~$250.
Link Posted: 7/20/2005 10:51:01 AM EDT
sweet ,,where did you get that stock??
Link Posted: 7/20/2005 10:21:41 PM EDT

Originally Posted By graywolf:
sweet ,,where did you get that stock??



The EE
Link Posted: 7/21/2005 12:10:42 PM EDT

Originally Posted By LArifleMAN:

Originally Posted By graywolf:
sweet ,,where did you get that stock??



The EE



What is the "EE"?
Link Posted: 7/21/2005 8:13:58 PM EDT
Equipment Exchange.

(tab at the top of your screen)
Link Posted: 7/21/2005 8:58:06 PM EDT
How's the lock up & cheekweld?
Link Posted: 7/21/2005 10:35:09 PM EDT
It locks up real nice, the cheekweld isn't the greatest but it isn't that bad either.
Link Posted: 7/30/2005 10:20:20 AM EDT
Damn. I just started a new post looking for one of these. Federal Ordnance. Thanks for the info. Now to find one of these things.

SM
Link Posted: 7/30/2005 8:33:56 PM EDT
There is a guy who has one on gunbroker, its been there for a while. Probably due to the $300 price tag
Link Posted: 8/22/2005 8:02:14 PM EDT
My custom barrel comes in tomorrow 11.5" w/5.5" FS.......woooohoooo.

Will post pic when I channel the stock and moun the barrel
Link Posted: 8/23/2005 5:02:08 AM EDT

Originally Posted By LArifleMAN:
My custom barrel comes in tomorrow 11.5" w/5.5" FS.......woooohoooo.

Will post pic when I channel the stock and moun the barrel



pix and link, por favor!
Link Posted: 8/23/2005 7:00:53 PM EDT







Top Top