Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/28/2002 2:29:32 PM EST
Yes I know a silencer will have the ATF knocking on the door with handcuffs, but is
there a way to have a muzzle brake but not the
extra noise ? Most muzzle brakes deflect the
gasses (explosion) back toward the shooter,
why can't the gasses be aimed away from the shooter ?
Link Posted: 3/28/2002 2:48:18 PM EST
[Last Edit: 3/28/2002 2:49:47 PM EST by AR15FENCER]
well, with a brake, it blows the gasses either at about a 90 degree angle from the muzzle, or back at an angle. If you diverted the gas any more forward than 90 degrees, it wouldn't reduce recoil, would it?

What I think might work tho, is cut a hole in a board, and stick your muzzle through that. Thus the sound comes back and is deflected off of the board. :)

M@
Link Posted: 3/28/2002 3:02:56 PM EST
Check out Tapco, they sell a bunch of sleeves for M-brakes that are supposed to allow gas to vent in the right place to reduce recoil.
Link Posted: 3/28/2002 3:08:26 PM EST

Originally Posted By AR15FENCER:
What I think might work tho, is cut a hole in a board, and stick your muzzle through that. Thus the sound comes back and is deflected off of the board. :)

M@



Too phucking phunny!
Link Posted: 3/28/2002 3:53:16 PM EST
Don't know if this cuts noise, but it deflects the blast up and away from the shooter and bystanders. Just what you need for a 50.

Link Posted: 3/28/2002 4:15:51 PM EST
Link Posted: 3/28/2002 5:04:32 PM EST
Hehe, the person who posted it on BH said it weighed something like 160 pounds.
Top Top