Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 10/28/2004 2:52:29 PM EST
Does anyone make a two round extension or does any other model fit the 590?
Link Posted: 10/28/2004 3:38:43 PM EST
As I recall, you can't extend a Mossberg gun unless you also buy a new barrel.

If you buy a barrel set up for a larger magazine capacity, you only have to buy a longer tube and spring.

In other words, there IS no "extension" magazine for the Mossberg.
Link Posted: 10/28/2004 4:25:08 PM EST
The 590 & 835 pump use a different style barrel than the 500. In theory a mag extension could be made for the 590 since it uses a Remington style open ended mag tube with external threads. The Mossberg 5500 & 9200 have mag extensions available, maybe a Choate extension for the semi Mossy would work on a 590.
Link Posted: 10/28/2004 8:28:52 PM EST
(Note to self: always be sure to properly read model numbers in posts).

Sorry, I read Mossberg 500, not 590.
Link Posted: 10/29/2004 6:05:34 AM EST
On this subject, anyone know of a good source for Mossberg 20" barrels and the 8shot mag tube that goes with them?
Link Posted: 10/29/2004 8:25:52 AM EST
Link Posted: 10/31/2004 2:59:00 PM EST
[Last Edit: 10/31/2004 2:59:45 PM EST by BushMeister]
Haven't bought from Numrich, but they seem to have a ton of Mossberg parts:

www.e-gunparts.com/model.asp?idDept=170
Link Posted: 10/31/2004 4:03:44 PM EST
The 20" barrels & mag tubes turn up on eBay sometimes also.
Link Posted: 11/1/2004 7:43:39 AM EST
Thanks for the info guys! I just found a full length mag tube/20" barrel front end kit on eBay for about $90, heatshield, pump handle, and everything. Gonna convert a 28" Mossy field gun into a tac blaster
Top Top