Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 7/23/2008 3:50:04 AM EST
Lake City is the most common.

However is Prvi Partizan or PMC (precision made cartride not the Korean manuf.) considered a military case? What are some examples besides LC?

I am just concidering the 10% reduction in working up loads for military brass.
Case size and thicknesses. I have a lot of brass I am sarting to prep from various headstamps. I just want to seperate as needed.

Thanks
Link Posted: 7/23/2008 4:00:11 AM EST
In general, the 10% was for domestic .30 calibers.

Imports? Good luck. Brass weight is a pretty good indicator of capacity.
Link Posted: 7/23/2008 4:25:49 AM EST
Link Posted: 7/23/2008 5:32:19 AM EST
found the case weights (averages) at
www.6mmbr.com/223Rem.html

Thanks
I'll weigh them as needed to determine
Link Posted: 7/23/2008 6:38:09 AM EST
The latest Speer Manual indicates that they used mil-spec brass for there 308 loads so no reduction was needed, I still reduced it by 10% and worked up to 43.8 of IMR 4895 using a #3037 Hornady
I checked as I was going up for signs of excessive pressure and have had no issues with the LC brass I am using
Top Top