Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/22/2017 10:05:29 PM
Posted: 8/28/2004 12:14:28 PM EST
I have an Interarms 7mm rem Mag. It has a sporterized Mauser type action/bolt. It has a 2 position sporterized thumb safety rather than the old wing/flag style. I was wondering how to disassemble the bolt for cleaning/lube. thanks
PL25
Link Posted: 8/31/2004 1:21:06 AM EST
[Last Edit: 8/31/2004 1:32:23 AM EST by Lloyd-Jr]
www.stevespages.com/page7b.htm
Go to "Interarms Mark X", open the PDF, scroll down to pg. 16 & 17 (of the PDF page system not the
manual page numbers). Make sure to use a strong wire such as a large safety pin or nail,
a paper clip may be to soft. You may want to leave the adjustable trigger to someone who has
done them before. Good luck!
/L.jr.

P.S.> You can get the large external (to the bolt body) extractor off of the bolt but it ain't worth it
trying to get it back on. It's attached to a thin piece of 'sheet steel' that wraps around the bolt body.
If you deform it, the bolt will no longer operate as 'smoothly' as before. Just flush it with a light lube.
Top Top