Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 9/24/2005 5:12:57 AM EDT
does anyone know if a magazine extension exists for this model? its a Mossberg 500 Super Bantam 20G, comes w/22" barrel. if possible I want a mag extension the whole length of the barrel, but seeing as the barrel has the endcap dat goes over the magazine tube, I don't know if it'll work. any ideas?

Link Posted: 9/24/2005 6:27:56 AM EDT
Your simplest bet may be to purchase the extended-length magazine tube. From what I've heard, the Mossberg 500 magazine is secured to the receiver with a nut and bolt. I recall a company making an extension for the Winchester 1300 (which has a similar style endcap), but I cannot recall hearing of the same for the Mossberg.
Link Posted: 9/24/2005 6:43:41 PM EDT
NO! the winchester 1300 end cap is NOT simuler to the Mossy 500!
Link Posted: 9/24/2005 10:39:21 PM EDT
Sorry but the 500 does not accept magazine extensions due to the screw method mossberg use to secure the barrel to the magazine.
The only mossberg pumps that can accept extensions are the 590 and 835 because of the removable endcap on the magazine.
Link Posted: 9/25/2005 3:45:44 AM EDT
You would have to replace the Mag tube, spring, and barrel to get more rnds in the gun. On my Moss 500's I just cut the barrels down to 19 inches and call it a day.

Or go to Knoxx for their box/drum mag setup.

Top Top