Go or no go?

At that price, it makes converting it from a "Sporting" configuration to a 93 clone a lot more reasonable, IYAM.

I'm not sure how reasonable it is after reading some of the details on HKPRO... http://www.hkpro.com/forum/hk-long-gun-talk/135711-mke-93-tactical-2.html

The stock and grip frame are welded together, so those need chucked entirely.  Triple frame at the front is wrong.  Receiver looks like they have some dimensional issues.  May have to do a lot of work to get the blocking bars out of the mag well and repair the holes.  Bolt is milled pretty heavily for the sear block.

I dunno, if you're into oddball clones, the price is good, but know that converting to back to a 93/33 clone is going to be expensive and not a DIY project.

Probably be better off grabbing a HK33 kit from Apex, a flat/barrel/922R parts from HKParts.net, and having a clone built.

Didn't they do something wierd at the rear of the receiver? I seem to remember they had 2 pushpin holes, but not like a 91/G3, instead one up top and one down low like the SP89/MP5K/PDW setup? Maybe I'm wrong...

They do, check that HKPRO link for some pics of it.  Seems like the bolt carrier will hit the top pin and cause damage.

I'd get it and make a .223 MSG3 with it.

HKPro MSG3

yup bidding picked up at the last min and she went for $1,100 plus 18%

Not too awfully bad. Sub $1,000 would be a good deal. They can still be had out there for $1200 plus. Too bad PTR lacks the tooling eh?