Looking for 10/22 stock that takes AR buffer tube

Site Notices

[ARCHIVED THREAD] - Looking for 10/22 stock that takes AR buffer tube

Posted: 6/1/2017 9:05:28 PM EDT

Ok here is the game plan: buying a charger, I want to put it in a chassis that takes an AR buffer tube so I can mount a shockwave brace to it I've seen several chassis setup like that but I need to be sure I can swap the tube out for the shockwaves tube.

Posted: 6/1/2017 9:52:43 PM EDT

[#1]

Bonus if it folds

Posted: 6/1/2017 11:22:55 PM EDT

[#2]

Rig something up

Posted: 6/2/2017 7:50:45 AM EDT

[#3]

Got some more pics of what you did? What adapter is that?

Posted: 6/2/2017 8:08:14 AM EDT

[#4]

PMACA has several types that take AR buffer tubes. This is one with a long rifle FF tube on it.

CHRIS

Posted: 6/2/2017 8:28:44 AM EDT

[#5]

This has a built in tube but I think you can use any AR butt stock on it.

BLACKHAWK! KNOXX Axiom R/F Stock

Posted: 6/2/2017 8:49:08 AM EDT

[#6]

Quote History

Quoted:
PMACA has several types that take AR buffer tubes. This is one with a long rifle FF tube on it.

https://www.AR15.Com/media/mediaFiles/30361/93918.JPG

CHRIS

View Quote

X2 on the PMACA

Posted: 6/2/2017 6:43:07 PM EDT

[#7]

Credit: AJ_Dual for being the first to get this working with an SB15 and for helping me with a parts list and ideas.

Wacha guys think? Still have to modify the forend to fit on the takedown barrel.

Posted: 6/3/2017 1:05:53 AM EDT

[#8]

Quote History

Quoted:
http://i.imgur.com/nIhMfkg.jpg
http://i.imgur.com/jvcdHJn.jpg

Wacha guys think? Still have to modify the forend to fit on the takedown barrel.

View Quote

Like sex and candy! But I need details !

Posted: 6/3/2017 3:01:05 AM EDT

[#9]

Quote History

Quoted:

Like sex and candy! But I need details !

View Quote

Credit: AJ_Dual - He did this years ago with an SB15 and gave me a long write up on how to do this.

Parts list:

Ruger Charger Takedown cut and threaded to 4.5"
Blackhawk! Axiom charger stock
Double star Standard Folding Mechanism (FSM) (W/Boss)
Double Star CAR 15 Stock Adapter (W/Boss)
Shockwave Blade + Dimpled tube (Skidtactical.com ;) )

Remember, you have to buy the charger version, not the rifle.

Once I set the shockwave blade to the same LOP as my AR-15 (2 clicks out on AR stock), the back of the shockwave blade was just 1" shorter off the end of the 4.5" barrel. So if you're short on money, a non-takedown version would be good enough. Then if you have a can, you can just thread it on. Plus, you would not have the hassle of having to modify the forend to fit the takedown barrel.

I honestly did a bad job with this. JB weld is oozing (cleaned a bit up), plastic is not pretty in some spots, forend still needs some brain work for a working design. But, it's amazing, quiet and might just be my new favorite gun!

Posted: 6/3/2017 10:04:54 AM EDT

[#10]

That is pretty slick.

CHRIS

Posted: 6/4/2017 8:08:15 PM EDT

[#11]

Strike force stock may work looked at one in person and I'll have to make small mods but it does fold so that's sweet

Posted: 6/7/2017 12:23:47 PM EDT

[#12]

MDT LSS 10/22 Chassis They also sell a Folding Stock Adapter for use with the LSS.

Posted: 6/7/2017 11:51:58 PM EDT

[#13]

The PMACA chassis is what I'm using for my charger pistol build:

Posted: 6/26/2017 12:55:21 PM EDT

[#14]

Quote History

Quoted:
The PMACA chassis is what I'm using for my charger pistol build:

http://i78.photobucket.com/albums/j88/Engineer303/ammo_and_guns/IMG_0040_zpsavnqsldi.jpg

http://i78.photobucket.com/albums/j88/Engineer303/ammo_and_guns/IMG_0042_zpsfwjiilhm.jpg

View Quote

That's a nice build Engineer, I have the same chassis with a Hogue grip and a 8" taper threaded barrel. I've had the Charger in several different configurations and just can't get it quite like I want it. The Hogue grip and factory GI just seem to be at a bit too much of an angle for me. I was curious about your grip and barrel setup. The grip doesn't appear to be at quite the same angle as standard GI/AR, was this modified by you or just different standards of a manufacturer? I couldn't find a threaded barrel anywhere to come out to the perfect length to fit the chassis as does yours. Did you cut down a .920 or standard barrel for that? Tactical Solutions used to make a 6" threaded lightweight .920 barrel, but has been discontinued for several years now. I'd love to run across one of those!

Posted: 6/26/2017 2:09:55 PM EDT

[#15]

Quote History

Quoted:

That's a nice build Engineer, I have the same chassis with a Hogue grip and a 8" taper threaded barrel. I've had the Charger in several different configurations and just can't get it quite like I want it. The Hogue grip and factory GI just seem to be at a bit too much of an angle for me. I was curious about your grip and barrel setup. The grip doesn't appear to be at quite the same angle as standard GI/AR, was this modified by you or just different standards of a manufacturer? I couldn't find a threaded barrel anywhere to come out to the perfect length to fit the chassis as does yours. Did you cut down a .920 or standard barrel for that? Tactical Solutions used to make a 6" threaded lightweight .920 barrel, but has been discontinued for several years now. I'd love to run across one of those!

View Quote

Thanks for the compliments!

The grip is a Griffin Armament A3. It's more vertical than the old A1 grip and handles much nicer than the Hogue I had on previously. Doesn't quite integrate as well with the gap filler but I'll take function over form.

The barrel is a KIDD 6" pistol barrel. It's not lightweight, but the weight is bearable since it's only 6" long. If you are looking for a lighter weight barrel, Beyer makes a 6" ultralight target barrel that is threaded.

Posted: 8/23/2017 5:41:03 AM EDT

[#16]

Quote History

Quoted:
PMACA has several types that take AR buffer tubes. This is one with a long rifle FF tube on it.

https://www.AR15.Com/media/mediaFiles/30361/93918.JPG

CHRIS

View Quote

What hand guard is that and how did you mod it to work with the PMACA chassis. I have been wanting to do something just like that. Any help would be awesome, thanks!

Posted: 8/23/2017 6:17:36 PM EDT

[#17]

Quote History

Quoted:

What hand guard is that and how did you mod it to work with the PMACA chassis. I have been wanting to do something just like that. Any help would be awesome, thanks!

View Quote

It's a Nordic Components small diameter AR22 handguard. It needs notched on the end closest to the action so that it slides back farther into the chassis. I did it with a mill, but a determined guy could take care of it with a bandsaw, hacksaw, or dremel.

CHRIS

Posted: 8/28/2017 10:39:00 PM EDT

[#18]

Mine....

Posted: 9/28/2017 2:48:12 AM EDT

[#19]

Quote History

Quoted:
Mine....

http://www.hunt101.com/data/500/medium/20170722_134916.jpg

http://www.hunt101.com/data/500/medium/20170722_134945.jpg

View Quote

Nicely done. Also have a PMACA. What folding hinge and buttplate is on that tube?

Posted: 9/29/2017 9:47:58 AM EDT

[#20]

I would buy this. It is a DEAL!

http://www.rimfirecentral.com/forums/vbclassified.php?do=ad&id=184801

Posted: 9/29/2017 1:33:39 PM EDT

[#21]

We now have another option:

http://www.thefirearmblog.com/blog/2017/09/26/ruger-22-charger-ar-pistol-brace-adapter-copper-custom/

Posted: 9/29/2017 2:00:37 PM EDT

[#22]

https://youtu.be/aebaIK6tQyk22 plinkster

Posted: 9/29/2017 9:39:05 PM EDT

[#23]

Quote History

Quoted:
The PMACA chassis is what I'm using for my charger pistol build:

http://i.imgur.com/sbjsOSB.jpg

http://i.imgur.com/4hynpYu.jpg

View Quote

How is the cheek weld with those sights on the PMACA chassis. I have one and would like to use sights like that, but I am afraid they will be too low.