Load recommendations for .38 SPL using Titegroup?

[ARCHIVED THREAD] - Load recommendations for .38 SPL using Titegroup?

Posted: 4/19/2017 4:45:40 PM EDT

I'm using Titegroup and 158 gr plated round nose from Berry's bullets. These loads are practice ammo from a S&W 442. Thanks in advance!

Posted: 4/19/2017 5:54:55 PM EDT

I don't use Titegroup but here is this, from the Hodgdon website:

Attached File

Hodgdon Reloading Center

Posted: 4/19/2017 10:17:37 PM EDT

In cases OP's confused by the post above, you use lead bullet data for plated bullets.

Posted: 4/19/2017 10:47:48 PM EDT

Quote History

Quoted:
In cases OP's confused by the post above, you use lead bullet data for plated bullets.

View Quote

Good to know, thank you

Posted: 4/19/2017 10:48:38 PM EDT

Quote History

Quoted:
I don't use Titegroup but here is this, from the Hodgdon website:

https://www.AR15.Com/media/mediaFiles/1153/38-special-with-titegroup-158-190994.JPG

Hodgdon Reloading Center

View Quote

And thanks for finding this

Posted: 4/20/2017 8:03:58 AM EDT

Quote History

Quoted:

And thanks for finding this

View Quote

You should save the link to Hodgdon's site, you should go there often.

If you use Alliant or Ramshot powders (you should) save their sites also.

Posted: 4/20/2017 8:58:44 AM EDT

I believe I ended up using 3.4 gr Titegroup with 158 gr moly coated bullets.

Been awhile since I loaded any of those and then also started experimenting with Clays.

[ARCHIVED THREAD] - Load recommendations for .38 SPL using Titegroup?

Armory » Reloading

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us