Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 8/20/2017 10:58:40 PM EST
I was wondering how they work with the Lock N Load press. Any issues? Thanks for your reply!
Link Posted: 8/21/2017 7:12:31 AM EST
I've loaded 20k+ 9mm with Lee dies (carbide) on a Hornady LnL Progressive, you're good to go.
Link Posted: 8/21/2017 7:20:01 AM EST
Lee makes good dies I use a Dillon but my frist die is a Lee U die and the last is a fcd. Works very well for me
Link Posted: 8/23/2017 12:14:10 PM EST
Just fine.
I find the Lee expander just barely adequate for over sized .358" cast and/or coated bullets. Actually using a 38S&W insert.
I'll probably pick up a Hornady PTX for 9mm one day.
Link Posted: 8/23/2017 8:12:53 PM EST
In general, loading dies are interchangeable among all the various press manufacturers. They should all have the standard 7/8-14 thread, which is the biggest thing. 50 BMG dies are NOT 7/8" dies, but that's the only real exception I can think of.

One thing that MAY be a problem is the length of the dies compared to the thickness of the die deck of the press. The LnL AP has a pretty thick deck, so some dies - particularly for short cases - may not quite do the job. It's not the dies, as such, just the length the press needs for the die to work.
Top Top