Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 1/3/2012 2:19:56 PM EDT
Getting some Krylon Camo off of the plastic parts was pretty easy...Off the 'textured' parts, like the barrel and front sight base- not so much. Used straight Acetone and it got the majority of the paint off, but there is still a 'stain' look of the tan left on the rough surfaces. Is media blasting this the only way to remove it?
Link Posted: 1/3/2012 4:31:54 PM EDT
aircraft remover will take care of it. Just follow the instructions.
Link Posted: 1/3/2012 5:00:02 PM EDT
I used MEK to remove krylon from a lower I bought, it worked out pretty well.
Link Posted: 1/3/2012 5:01:55 PM EDT
Goof Off. Use a scrub brush for faster results.
Link Posted: 1/6/2012 3:39:12 PM EDT
I just bought the Citristrip in a can from walmart. Had a barrel done in alumahyde II that I sprayed and let sit for about 3 or 4 mins and then used a nylon stripping brush - stuff just wiped off. Then krylon'd the barrel and messed up a spot so I sprayed it with the citristrip and in under 30 secs it just wiped off with a paper towel. Great stuff and no harsh smell.
Top Top