Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/4/2002 3:21:04 PM EST
Anyone have the JP Enterprises Recoil Eliminator installed on any of your rifles (bolt guns especially). They are sort-of weird looking, but I hear they really reduce recoil alot.

Was thinking of putting one on a .308 or .300WM bolt gun. Will it truly reduce the recoil significantly? Any experiences?

Also, have you noticed any effect on accuracy...as I know many times the muzzle breaks will open up your groups. Thanks in advance.
Link Posted: 6/4/2002 3:52:05 PM EST
At the BRC they had set ups on a AR10, AR15 and I think it was a 700M. I shot the ar15 and it was great I am planning on having one put on my 20". The AR10 still kicked but I felt the difference. The rifle JP built is fantastic and it a custom Armalite.
The installation is very high quality. It is wort getting and really doesn't look that funny. At laeast to me I like the style. DPMS also has a new Brake> I think it's called a birdcage. I think it will work very good also, but the JP really cuts the recoil down on the 223.
Link Posted: 6/5/2002 9:00:58 AM EST
Anyone have experience with this on a bolt gun...a .308 or stronger?
Link Posted: 6/5/2002 9:26:45 AM EST
I have used the JP brake on my .338 Lapua Mag. built up on the Sako TRG-41. It reduces recoil substantially. I have fired the Sako TRG-S in the same caliber with no brake and I can tell you for sure that that brake is pretty efficient and works well.

Link Posted: 6/5/2002 9:29:03 AM EST
How well would one work on an 11.5" barreled M16 for full auto fire?

Link Posted: 6/6/2002 2:08:05 PM EST
At the Mystery Mountain 3-Gun we had some idle time and my shooting buddy was double tapping a 200 yd plate with his JP and never missed the second shot. I also have a JP comp on my "western" rifle. Having picked up a certificate off the prize table, I just sent my BM 16" hoser out for their brake.
Link Posted: 6/9/2002 11:49:10 AM EST
Anyone...anyone?
Bueller........Bueller?

Again, anyone have experience with one on a bolt gun like a .308 or higher? Any accuracy reduction?

Link Posted: 6/9/2002 12:01:11 PM EST
I have spoken to another individual here who also had one installed on a .338 Lapua. It was a Sake TRG-S, and he said that the recoil was actually pleasant after the install, and that he could shoot MANY more rounds in a day.
Link Posted: 8/7/2002 9:34:40 PM EST
Anyone else? Again, on a .308 or .300mag bolt rifle? First hand experience is much appreciated. Thanks.
Link Posted: 8/8/2002 5:34:55 AM EST
If the JP brake can tame a .338 Lapua mag, it's gonna work on a .308 or .300. I bet the .338 LM would be great for hunting dinosaurs.
Link Posted: 8/9/2002 11:24:25 AM EST
I have one on a .223 AR-15 and it almost totally eliminates recoil.
Link Posted: 8/9/2002 6:11:32 PM EST
Can someone post a picture?

But, anyway, I LIKE recoil!
Link Posted: 8/9/2002 6:36:38 PM EST
I have a JP AR15 with the muzzle brake. It works very well but does not make a big difference on a 12lb .223 rifle. I got a very light weight 18" barrel Remington Model 7 in .308. I and my friends found the recoil excessive. I had a Pachmayr Decelerator recoil pad installed and found the gun to be ok for hunting but still too much on the shooting bench. I decided to send the gun to JP for a package deal; muzzle brake, cryo treatment, and trigger work. It was around $300 at that time about two years ago. The result was great! Recoil is like that of a typical 7lb .223 instead of a .308. It has an outstanding trigger and gives MOA accuracy. The noise is greater but I always shoot with hearing protection, even when hunting.
Top Top