Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/14/2003 3:51:04 PM EST
Hello! I just purchased a DAEWOO DR-200 and am in need of FCG parts, and comparing them side by side to my AR-15 they seem very similar.

Are they interchangable?

Link Posted: 7/14/2003 8:57:23 PM EST
[Last Edit: 7/14/2003 8:57:56 PM EST by AR18]
Daewoo was the South Korean manufactor of the M16A1s issused to the ROK army. If I remember correctly, when Daewoo developed the K1 series rifles to replace the M16s, they borrowed the best features of the M16 and the AK. Mostly likely the FCG is AR15 spec parts on the DR200.
Link Posted: 7/16/2003 8:50:45 AM EST
I replaced the stock on my DR200 (which a friend now owns) with an ACE skeleton stock/PG, and it came with a replacement hammer...an M16 hammer. The only FCG part that won't interchange would be the selector, IIRC. Btw, if yours still has the thumbhole stock, the ACE skeleton stock would be the first thing I bought for it, other than the parts you already need. It'll make it a little more nose-heavy, but it's a hell of a lot more comfortable, and looks even better.
Link Posted: 7/16/2003 4:31:51 PM EST
I remember examining a Daewoo DR200 some years ago, and was worried about getting parts. The shop owner and I compared the parts to those in our AR15's, and concluded that the parts most likely to need replacing could be done so with AR parts.
Top Top