Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
12/6/2019 7:27:02 PM
Posted: 2/24/2007 2:22:20 AM EST
[Last Edit: 2/24/2007 2:26:20 AM EST by Shark15]
I bought some old preban mags at a gun show for $4 each. They didn't work good the springs were shot and they had the black followers.

The first thing i did was bead blast the old finish off. Then did type II anodizing and dyed it black for a base. Then I used Brownells Black Moly-teflon. I coated the inside and out side with the moly-teflon. The spring, follower, and baseplate were replaced with Magpul rebuild kits.

I put two coats of Moly-teflon on the mags and they fit the mag well perfect.

The mag to the right is what the other 4 mags looked like.




ETA 2nd pic added
Link Posted: 2/24/2007 5:24:55 AM EST

Looks like a great job...
Link Posted: 2/24/2007 5:37:58 AM EST
Good Job





Link Posted: 2/24/2007 7:35:08 AM EST
DrJWelch,

How'd you prep you mags prior to spraying? Soap/water? Scotchbrite?

Thanks,

Scott
Link Posted: 2/24/2007 8:57:16 AM EST

Originally Posted By ScottS:
DrJWelch,

How'd you prep you mags prior to spraying? Soap/water? Scotchbrite?

Thanks,

Scott


Soap/water scrub brush, then dried them in the oven in the first pic.
Top Top