Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/24/2006 5:57:47 AM EST
I have and original side mount and base for a Mosin 91\30 rifle, I took it to a local Gunsmith to have it installed on my 91\30 and he told me that he couldn't do the job because if he drilled and taped the receiver the rifle could become apart when fired. is this BS ?
I will like to know if anyone else installed an original side mount in to a 91\30 receiver ..
Link Posted: 2/24/2006 6:35:26 AM EST
Although that's not very realistic if you drilled in the right places, on his end and with other smith's I've talked to, there is a big liability factor when doing work on older C&R guns. Simply because their quality of steel could be suspect. You'd most likely have to do it yourself, as I haven't found a smith in my area that will drill and tap a nagant.

go to www.surplusrifle.com they have a treasure trove of do-it-yourself articles for C&Rs. Especially for the Nagants. In fact I think there is an article on how to install the side mount.

Link Posted: 2/24/2006 5:27:54 PM EST
It's BS. Coles made LOTS of repro 91/30 snipers over the last few years. People generally report favorably. Haven't heard a word about them coming apart

Also, lot's of "ex" snipers, where the original holes were plugged, that people later restored without any issues.
Link Posted: 2/25/2006 12:11:58 AM EST
Blackwolf, where'd you pick up your sidemount and base? I'm hunting for one myself right now.
Link Posted: 2/25/2006 4:49:52 AM EST
I saw that you are in Texas, if you are in eastern part there is a fellow inWoodville by the name of Wesley Knight at Knight Gun Works. He did mine back a couple years ago and it was perfict.(409)331-9513 this is his phone number and his e-mail is gunshop@samlink.com.

Link Posted: 2/25/2006 9:54:20 AM EST
I got the Mount on Ebay ....
Link Posted: 2/25/2006 9:55:08 AM EST
Thanks drj3828 I will give him a call....
Top Top