Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/15/2006 3:02:25 PM EST
I'm wondering how you guys keep your bolt action C+R's lubed? Specificly the bolt. I've got a Mosin and a K31. Do you use CLP on the bolt, or some kind of grease?
Link Posted: 2/15/2006 3:24:03 PM EST
I use tri flow and have had no problems and it works really well.
Link Posted: 2/15/2006 3:24:55 PM EST
I just use the Ed's Red that I clean with.
Link Posted: 2/15/2006 3:26:20 PM EST
Rule of thumb for milsurps. Oil the bolt action rifles and grease the semi autos. I use Rem Oil, EEZOX, or any good gun oil. CLP wold be fine, but IMHO EEZOX provides better protection.
Link Posted: 2/15/2006 5:40:09 PM EST
Thanks for the suggestions. I've been using Break Free on my Mosin. I just got the K31, and there was grease in the bolt (not cosmo) which just made me wonder. Thanks.
Link Posted: 2/16/2006 2:33:53 AM EST
whats a good grease reccomendation?
Link Posted: 2/16/2006 3:05:25 AM EST
[Last Edit: 2/16/2006 3:05:55 AM EST by Will-Rogers]
Oil: a quality synthetic. Most "gun oils" are overhyped and overpriced.

Grease: a quality lithium grease for disc brake bearings.

Don't use to much.

I don't put much stock in "boutique" lubricants when it comes to non full-auto weapons.
Link Posted: 2/16/2006 4:25:05 AM EST

Originally Posted By USMARINE1108:
Thanks for the suggestions. I've been using Break Free on my Mosin. I just got the K31, and there was grease in the bolt (not cosmo) which just made me wonder. Thanks.



Might've been oil sometime in the fifties

I use FP-10 on the bolts of Mosins, Enfields, and Mausers without an issue.
Link Posted: 2/16/2006 6:14:09 AM EST
Remove firing pin from bolt, spray on CLP, re-assemble bolt.
Link Posted: 2/16/2006 10:59:21 AM EST
Another rule of thumb: If it slides, use grease. (rear of bolt lugs)
If it pivots, use oil. (trigger pins)
Top Top