Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Site Notices
10/30/2020 2:42:12 PM
Posted: 8/13/2020 10:45:15 PM EDT
On Hornady’s website they state that lead and plated will not work with these dies. Has anyone had any luck with them on a Hornady LnL progressive?

Mr Bullet Feeder makes one that is supposedly 100% with any type of bullet

Specifically talking about Berrys 115gr and Xtreme 147 flat point
Link Posted: 8/13/2020 10:47:37 PM EDT
I use plated in mine all the time. Works just fine.
Link Posted: 8/13/2020 11:18:52 PM EDT
[Last Edit: 8/13/2020 11:19:24 PM EDT by chumly2071]
Can't speak to the Hornady dies, but the MBF ones I have work very well when adjusted properly.
Link Posted: 8/14/2020 8:45:20 AM EDT
Thanks all. Gonna try it. Cheaper than a MBF and I have about 3k in FMJ also
Link Posted: 8/14/2020 8:56:02 AM EDT
My Hornady die worked fine with plated 9mm from RMR.
Link Posted: 8/14/2020 8:56:50 AM EDT
Plated works for me on .45 and 9mm.
Link Posted: 8/14/2020 4:41:28 PM EDT
Another option is using those does with the Hornady bullet feed tubes, if you’re doing pistol ammo. They’re about $30 for 3, and they work well for me
Link Posted: 8/14/2020 5:45:22 PM EDT
I have both the Hornady and Mr Bullet Feeder, get the Mr Bullet as it's easier to set up and will even feed bullets lubed with Alox. Hornday only really works good with jacketed bullets.
Link Posted: 8/14/2020 6:22:17 PM EDT
My Hornady bullet feeder dies work great with plated and lead bullets.
Top Top