Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/18/2005 5:30:33 PM EST
What's a good place to get a barrel threaded?

I've got a suppressor inbound, and am looking to get a few rifles and pistols threaded.

I checked with ADCO, and they only thread stripped barrels.

I contacted AR15barrels.com, and they also only do barrels or non-firearms.

I have dealt with KKF in the past, and may go that route.

Any other options?
Link Posted: 12/19/2005 5:37:41 AM EST
Noveske Gunworks in Oregon does it. They are the only ones guaranteed by AAC
Link Posted: 12/19/2005 10:51:46 AM EST
Noveske things are works of art. A bit pricey, but nevertheless good.

Mark @ TROS here in Clackamas (Oregon) is where I'm getting two .22's threaded.
Link Posted: 12/19/2005 12:42:18 PM EST
Make sure that the person who does the threading does it concentric to the bore, not the outside of the barrel. Many barrels have bores that are not perfectly centered. If the threads are off, it could cause a baffle strike. I would recommend using a suppressor manufacturer to do the threading. I've had SRT thread a Ruger 77/22 barrel as well as one for a Remington 700. Not to mention that SRT's owner is a great guy, and posts here on Arfcom under the screen name AZDoug.
Link Posted: 12/19/2005 8:15:29 PM EST
Lauer Weaponry threaded a barrel for me a couple years ago.
Link Posted: 12/21/2005 2:50:19 PM EST
Check this out. He said he'd cut and thread a 9mm barrel for $50.00. If you send him the complete upper it's $90.00...

Top Top