Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 11/29/2007 3:26:12 PM EDT
I want to build up a new upper and am thinking about a 14.5" barrel. I want to have the freedom to use the upper on my title I lowers. If a bilock is permanently attached on a 14.5" barrel, is it over 16"? I assume so, but I need confirmation.
Link Posted: 11/29/2007 5:40:08 PM EDT
[Last Edit: 11/29/2007 5:41:03 PM EDT by HKJAY]
My A2 bilock is 2-1/16 in long.
Link Posted: 11/29/2007 5:44:20 PM EDT
Is that counting the .6" of thread or not. It would need to be 1.5" from the muzzle crown to make it to 16" and welded on of course.
Link Posted: 11/29/2007 6:49:33 PM EDT
Link Posted: 11/30/2007 6:46:01 PM EDT
When the Bi-Lock is perm. mounted to a 14.5" barrel it meets the 16" requirement. Have Gemtech or ADCO do the work.
Link Posted: 12/1/2007 4:30:45 AM EDT
Link Posted: 12/1/2007 2:27:17 PM EDT

Originally Posted By Zak-Smith:
Yes.

demigodllc.com/photo/SRECCE/smaller/A100_0206_img.jpg
............... Larger version of above photo.


Hey Zak, aren't the tabs on the FH supposed to be horizontal, straight out to the sides?
Link Posted: 12/2/2007 11:05:28 AM EDT

Originally Posted By MisterWilson:

Originally Posted By Zak-Smith:
Yes.

demigodllc.com/photo/SRECCE/smaller/A100_0206_img.jpg
............... Larger version of above photo.


Hey Zak, aren't the tabs on the FH supposed to be horizontal, straight out to the sides?


Not if he's trying to avoid gas on his optics.
Link Posted: 12/2/2007 11:29:50 AM EDT
Link Posted: 12/2/2007 12:52:20 PM EDT
Gas escaping from the back of the suppressor can coat the objective lenses of optics with residue. Placing the lug in the vertical position helps deflect it away.
Link Posted: 12/2/2007 1:19:07 PM EDT
OIC. Hmm, learn something new everyday.
Top Top