Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 1/15/2013 4:03:35 AM EDT
I just got my multimount and Gemtech has no documentation on the baffle stack orientation for reassembly. Anyone have one that knows?? Or anyone know in general?

Link Posted: 1/15/2013 5:20:20 PM EDT
Originally Posted By Dano0386:
I just got my multimount and Gemtech has no documentation on the baffle stack orientation for reassembly. Anyone have one that knows?? Or anyone know in general?



Stainless baffle in the very bottom (it'll be the heaver one), The top most baffle has no indexing teeth on top.

All in between doesn't matter.

I put them in till I can rotate with my finger then start rotating till all baffles seat against each other.

The opening on the side of the baffle doesn't matter if they are all on the same side or 180* out.
Link Posted: 1/16/2013 7:27:27 PM EDT
Awesome! Thanks so much! Any good tips on cleaning and keeping the thing from seizing up?
Link Posted: 1/18/2013 3:22:02 PM EDT
Are they now unlocked from the factory? When I bought mine they were sealed and came with an all aluminium stack.


Posted Via AR15.Com Mobile
Link Posted: 1/18/2013 6:14:44 PM EDT
I usually get the first baffle out pretty easily then pound the rest out against my hand.

Yes user serviceable, been shooting my MM 3 lug on my 10/22 with a 3 lug adapter. Things stupid quiet with sub sonics.

Link Posted: 1/18/2013 7:42:20 PM EDT

Originally Posted By DCMoney:
I usually get the first baffle out pretty easily then pound the rest out against my hand.

Yes user serviceable, been shooting my MM 3 lug on my 10/22 with a 3 lug adapter. Things stupid quiet with sub sonics.

https://sphotos-b.xx.fbcdn.net/hphotos-ash4/738380_10200341212396114_185730662_o.jpg

Why would you even try something like a 9mm can on a .22?





I really need to get the 1/2x28 thread mount, all I have right now is the LID.
Link Posted: 1/19/2013 4:57:31 AM EDT
That's my plan! 10/22 with subs... And now that's its take apart no worries about clogging it up. I read somewhere that a cheap soda blaster will bring those baffles back to factory condition without harming the aluminum. Might be the way to go with 22 lead everywhere. Now if Gemtech would only get some mounts made up!
Link Posted: 1/19/2013 5:10:20 AM EDT
Link Posted: 1/19/2013 5:21:24 AM EDT
Perfect! R&D makes me think it's legit!
Originally Posted By PHD:
With the new version of the Multimount (disassemblable), the baffle stack works best with the baffles all aligned in the same direction.


Link Posted: 1/20/2013 2:49:28 PM EDT
[Last Edit: 1/20/2013 2:50:26 PM EDT by DCMoney]
Originally Posted By AJE:

Originally Posted By DCMoney:
I usually get the first baffle out pretty easily then pound the rest out against my hand.

Yes user serviceable, been shooting my MM 3 lug on my 10/22 with a 3 lug adapter. Things stupid quiet with sub sonics.

https://sphotos-b.xx.fbcdn.net/hphotos-ash4/738380_10200341212396114_185730662_o.jpg

Why would you even try something like a 9mm can on a .22?





I really need to get the 1/2x28 thread mount, all I have right now is the LID.


Sweet!

Originally Posted By PHD:
With the new version of the Multimount (disassemblable), the baffle stack works best with the baffles all aligned in the same direction.


Thanks for the clarification.

EDIT: Plate is 75 Yards away 5/8" AR500 Steel


Link Posted: 1/20/2013 3:39:52 PM EDT
Originally Posted By PHD:
With the new version of the Multimount (disassemblable), the baffle stack works best with the baffles all aligned in the same direction.


Can we send the older ones back (manufactured in 2009) to be refitted?

Posted Via AR15.Com Mobile
Top Top