Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 10/21/2003 8:38:15 PM EDT
I was thinking about sending my 870 barrel in to be worked-over. Is it worth it? What about the porting? I was wondering if the porting increases muzzle flash for shooting in low-light?
Link Posted: 10/26/2003 7:56:35 AM EDT
[Last Edit: 10/28/2003 7:48:07 PM EDT by Wolfpack]
I have been wanting to buy one of his tricked out 590's for years now, I will someday...he just moved to AZ from CA. Bob

Link Posted: 10/26/2003 8:33:04 AM EDT
Do it!

I have a Gunsite Police 870 with an 18" barrel that was done by VangComp.

I didn't get one with the Comp. I fired one before and at night it will leave a big white V blocking your vision.

My 870 will hold Federal Tactical Buck Shot at 12" at 35 yards! I can use rifled slugs and hit a pop can at 100-130 yards. I have hit a cinder block at 270 yards after 3 tries.

Last week I went to shoot at a Sporting Clays fund raiser, and I could hit clays out just a far as any of the shooters that had fancy trap guns with full length barrels.

If you do anything to your shotgun, get the Vang.

Link Posted: 10/26/2003 1:27:37 PM EDT
Doh! Dammit......now I might have to get them to do my 870 Police 20" barrel!
Link Posted: 10/30/2003 12:11:56 AM EDT
On our department, we have about a dozen officers who have had their barrels Vang-Comped. About 9 of the 12 shoot great patterns. The other 3 shoot about the same as non Vang-Comped barrels. Vang supposedly told the 3 officers that nothing is perfect and their process helps most barrels.
When I have shot them in low light, I have not noticed any excessive flash through the porting but we use reduced-recoil loads and that does help.
Top Top