Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
PSA
Member Login

Site Notices
Posted: 4/14/2006 1:05:22 PM EDT
[Last Edit: 4/14/2006 1:35:06 PM EDT by drop_zone]
  On my FAL I have a DSA bolt cover so I can mount a Burris 3X9 scope that i took off a hunting rifle. I need a set of rings that will co-witness the irons and raise up the scope a little. Burris does not make anything in 1 inch. any suggestions?
Link Posted: 4/14/2006 5:29:39 PM EDT
If you want to use your iron sights with a scope mounted, your only oprion is a set of see through rings.  You can also use 1" reducers for some 30mm rings  

Co-witness is the wrong term.  Your irons would have to be visible through your optic.

I'll post some links later for some see through rings if I can find them.
Link Posted: 4/15/2006 11:01:43 AM EDT

Originally Posted By Shawnr1:
If you want to use your iron sights with a scope mounted, your only oprion is a set of see through rings.  You can also use 1" reducers for some 30mm rings  

Co-witness is the wrong term.  Your irons would have to be visible through your optic.

I'll post some links later for some see through rings if I can find them.



   Yes thats what I need, a cutout on the ring base so I could see the irons, I just couldent find any
Link Posted: 4/15/2006 4:08:51 PM EDT
Top Top