Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 4/3/2006 3:23:21 PM EST
[Last Edit: 4/3/2006 3:43:10 PM EST by Blue84S10]
What's the difference inbetween the FA FAL's and the Semi-auto FAL's? Is it all in the upper receiver? This is just purely a curiosity question.
Link Posted: 4/3/2006 3:43:12 PM EST
Ejector block is different and of course the auto sear. That's all I know of but there maybe other differences.
Link Posted: 4/3/2006 3:46:30 PM EST
Ok...I ask because when I built my 1919 I had to send all the guts out to be converted to semi auto...no need for that here right?
Link Posted: 4/3/2006 3:49:45 PM EST
No.

I replaced my HTS with US built parts but the originals look the same to me.
Link Posted: 4/3/2006 7:15:24 PM EST
OK So I found out I need to switch the selector switch. I guess that is what I was looking for
Link Posted: 4/3/2006 11:19:49 PM EST

Originally Posted By Blue84S10:
OK So I found out I need to switch the selector switch. I guess that is what I was looking for




No need for that. With a semi auto only upper receiver, you can use any part that will fit. The only part that will not fit in a semi only upper is the safety sear.
Link Posted: 4/4/2006 7:16:27 PM EST

Originally Posted By Maddogkiller:

Originally Posted By Blue84S10:
OK So I found out I need to switch the selector switch. I guess that is what I was looking for




No need for that. With a semi auto only upper receiver, you can use any part that will fit. The only part that will not fit in a semi only upper is the safety sear.



DSA's web page where they list their semi auto selector says "Required but does not count as US part".
Link Posted: 4/4/2006 9:35:09 PM EST

Originally Posted By Blue84S10:

Originally Posted By Maddogkiller:

Originally Posted By Blue84S10:
OK So I found out I need to switch the selector switch. I guess that is what I was looking for




No need for that. With a semi auto only upper receiver, you can use any part that will fit. The only part that will not fit in a semi only upper is the safety sear.



DSA's web page where they list their semi auto selector says "Required but does not count as US part".




That is marketing spin. The selector is "required" if you want your rifle to function properly. It is not required in order to comply with some silly law or to keep from violating some other silly law.
Link Posted: 4/5/2006 4:58:33 AM EST
Link Posted: 4/5/2006 6:00:15 AM EST

Originally Posted By Maddogkiller:

Originally Posted By Blue84S10:

Originally Posted By Maddogkiller:

Originally Posted By Blue84S10:
OK So I found out I need to switch the selector switch. I guess that is what I was looking for




No need for that. With a semi auto only upper receiver, you can use any part that will fit. The only part that will not fit in a semi only upper is the safety sear.



DSA's web page where they list their semi auto selector says "Required but does not count as US part".




That is marketing spin. The selector is "required" if you want your rifle to function properly. It is not required in order to comply with some silly law or to keep from violating some other silly law.




Yup - DSA is fulla crap on that one - their selector isn't "required" by anyone - it merely stops the selector from being able to reach the FA position - which won't hurt your rifle, but WILL temporarily turn it into a single shot rifle... To me, a better alternative is to install one of Wolfsburg Bob's pistol grips, which also stops the selector at the semi only position, counts as a US part, and only costs about $10 + shipping...



- georgestrings
Link Posted: 4/5/2006 7:30:07 AM EST
Did you get your barrel installed?
Link Posted: 4/5/2006 2:07:19 PM EST

Originally Posted By Lon_Moer:
Did you get your barrel installed?



Yup...just finished DuraCoating it too. I'm now waiting for the rest of my parts to come in the mail.....
Top Top