User Panel
User Panel
User Panel
|
Posted: 8/30/2013 3:07:34 PM EDT
[#1]
i can be of no help, but i love cci quiet. its quieter than my air rifles.
|
|
|
|
Posted: 8/30/2013 6:37:50 PM EDT
[#2]
Really low velocity ammo can get stuck in long barrels.
I have had Super Colibri get stuck before. |
|
|
|
Posted: 8/30/2013 6:55:57 PM EDT
[#3]
Quote HistoryQuoted:
Really low velocity ammo can get stuck in long barrels. I have had Super Colibri get stuck before. This |
|
|
|
Posted: 8/31/2013 4:17:16 PM EDT
[#4]
Read the box. It probably states that it shouldn't be shot from rifles. In order for it to be quiet, it must be low powered.
|
|
|
|
Posted: 8/31/2013 10:44:32 PM EDT
[#5]
I kill squirrels in my yard all the time using CCI Quiet 22 out of an ancient bolt rifle with a barrel that has got to be at least 28 inches long and I've never had one stick. Odd.
|
|
|
|
Posted: 9/1/2013 8:08:43 AM EDT
[#6]
Maybe excessive leading in the bore?
|
|
|
|
Posted: 9/1/2013 10:33:21 AM EDT
[#7]
Quote HistoryQuoted: Maybe excessive leading in the bore? |
|
|
|
Posted: 9/2/2013 3:49:46 AM EDT
[#8]
He says the barrel is clean as he cleaned it very well when he bought it.
The gun is a Mossberg 321. He thinks it's the twist rate... I have no idea. |
|
|
|
Posted: 9/2/2013 8:23:30 PM EDT
[#9]
Quote HistoryQuoted:
He says the barrel is clean as he cleaned it very well when he bought it. The gun is a Mossberg 321. He thinks it's the twist rate... I have no idea. There's clean, and then there's clean with all the lead removed. Unless he scrubbed hell out of the bore with solvent and at minimum a bronze brush that fits the bore, there's probably lead in the bore, especially right in front of the chamber. Get a tube of IOSSO paste and one of their stiff brushes and scrub the bore in the rifle to really see what is going on. A shiney look ain't it. The bore could also be rough enough to dramatically raise the friction. It ain't the twist rate. What makes him think it's different anyway? |
|
|
|
Posted: 9/3/2013 5:01:33 AM EDT
[#10]
Clean better. I am betting it's residual leading.
|
|
|
|
Posted: 9/6/2013 11:41:45 AM EDT
[#11]
In the olden days the chamber was plugged then a bit of mercury was poured in the barrel... then the muzzle plugged and the rifle tipped muzzle then chamber end up several times. The mercury would flow under the lead.
Of course that is now seen as a hazardous substance and too hazardous to even attempt! |
|
|
|
Posted: 9/6/2013 11:45:19 AM EDT
[#12]
How would that clean anything or remove the lead?
|
|
|
|
Posted: 9/6/2013 7:56:15 PM EDT
[#13]
Quote HistoryQuoted:
How would that clean anything or remove the lead? The mercury is heavy and will find a path to get under the surface between the steel and the lead. I once saw a thermometer broken onto a new metal TV tray (a metal tray us baby boomer sat on out laps to watch B&W TV) After rolling back and forth a few times it rolled under the paint and as it rolled about as the tray was tipped and teetered it continued to lift the paint from the tray, Though mercury is not quite as heavy as lead, it is more dense. It works under the lead quickly. |
|
|
|
Posted: 9/9/2013 3:31:16 PM EDT
[#14]
Quote HistoryQuoted:
How would that clean anything or remove the lead? Mercury dissolves lead, it used to be commonly used to clean lead out of barrels because of that. |
|
|
|
Posted: 9/9/2013 7:03:21 PM EDT
[#15]
I kill squirrels in my yard all the time using CCI Quiet 22 out of an ancient bolt rifle with a barrel that has got to be at least 28 inches long and I've never had one stick. Odd
Yours may have a loose or larger bore than the OP's |
|
|
|
Posted: 9/9/2013 7:19:15 PM EDT
[#16]
I shoot CCI quiet out of a Savage MKII cut down to 17" and threaded for a can. Never had a problem with a stuck bullet. It's QUIET with a can. I can snap my fingers louder than that.
|
|
|
|
Posted: 9/9/2013 7:56:15 PM EDT
[#17]
Any other tip to get the bullets out? I got super colibri stuck in my CZ 512.
|
|
|
|
Posted: 9/9/2013 8:06:25 PM EDT
[#18]
See if you guys can upgrade your extractors maybe it can claw them out? I did this with my 1022 and now i can shoot many different rounds that once got stuck in the chamber.
|
|
|
|
Posted: 9/10/2013 3:21:36 AM EDT
[#19]
Quote HistoryQuoted:
See if you guys can upgrade your extractors maybe it can claw them out? I did this with my 1022 and now i can shoot many different rounds that once got stuck in the chamber. The bullets are getting stuck in the barrel, not the cases getting stuck in the chamber. |
|
|
|
Posted: 9/10/2013 2:33:25 PM EDT
[#20]
My badd I didn't read the post well enough. I retract my post
 
|
|
|
|
Posted: 9/10/2013 3:15:12 PM EDT
[#21]
Quote HistoryQuoted:
Any other tip to get the bullets out? I got super colibri stuck in my CZ 512. Get a polished solid steel, aluminum or brass rod just a little longer than your barrel from bolt face to muzzle. Cut off a steel cleaning rod to a length no longer than needed. Drop the rod in and gently but firmly tap the bullet out. But the bullet ought to push out with just a cleaning rod with the gun clamped down tight so you can get a good push. A couple of wraps of tape along the length is probably a good idea to help keep the rod centered and off the rifling especially at the crown. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
