Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/27/2005 1:27:35 PM EST
So, what do I need to know?

G
Link Posted: 12/27/2005 1:32:17 PM EST
ammo
Link Posted: 12/27/2005 1:48:37 PM EST
Link Posted: 12/27/2005 1:55:19 PM EST
Got Australian and SA 7.62 in quantity. Ordered 9 used metric mags from CDNN. Lubed it with FP-10.

G
Link Posted: 12/27/2005 2:07:13 PM EST
What model did you get ?
Link Posted: 12/27/2005 4:13:38 PM EST
[Last Edit: 12/27/2005 4:14:15 PM EST by glock23carry]
www.dsarms.com/item-detail.cfm?ID=SA58C&storeid=1&image=sa58carbine.gif

SA58C with 18" barrel. Is there any chance of a single-point sling or just a three point?

G
Link Posted: 12/27/2005 5:22:31 PM EST
Not sure about a single point sling. I'm going with an Israeli-style one myself.

Mags are a good thing. A DSA Extreme Duty scope mount is good if you want to add an optic.
Link Posted: 12/27/2005 5:32:17 PM EST
learn to field strip it so you can clean it properly, including the gas operating rod, should of came with a FN FAL manual
Link Posted: 12/27/2005 5:42:24 PM EST

Originally Posted By glock23carry:
Is there any chance of a single-point sling or just a three point?


GPG
Link Posted: 12/27/2005 5:57:26 PM EST
Thank you sir!

G
Link Posted: 12/27/2005 6:25:06 PM EST
Link Posted: 12/27/2005 8:57:37 PM EST
falfiles.com/forums
excellent place to learn about FALs and accessories if you haven't already found it.
Link Posted: 12/27/2005 10:09:50 PM EST
[Last Edit: 12/27/2005 10:11:34 PM EST by Maddogkiller]
Congrats. That should be a dandy rifle. Go forth and blast.


Keep the gas piston and spring dry while firing. Put a little light oil on them when in the safe. After every range session, remove the hand guards, unscrew the gas regulator and clean it and the threads on the gas block thoroughly. Same with the entire gas system. A 1911 bore brush is perfect for scrubbing out the gas piston tube.


Link Posted: 12/28/2005 3:17:38 AM EST

Originally Posted By Maddogkiller:
Congrats. That should be a dandy rifle. Go forth and blast.


Keep the gas piston and spring dry while firing. Put a little light oil on them when in the safe. After every range session, remove the hand guards, unscrew the gas regulator and clean it and the threads on the gas block thoroughly. Same with the entire gas system. A 1911 bore brush is perfect for scrubbing out the gas piston tube.





Exactly what Maddogkiller stated. Read up on your new rifle and enjoy. Good pick, WarDawg
Link Posted: 12/28/2005 7:28:02 PM EST
Looked at the manual, do I really need a "special tool" to remove the buttstock?

G
Link Posted: 12/28/2005 10:45:44 PM EST
[Last Edit: 12/28/2005 10:47:09 PM EST by Maddogkiller]

Originally Posted By glock23carry:
Looked at the manual, do I really need a "special tool" to remove the buttstock?

G



You don't "need" the buttstock tool, but they are really inexpensive and the hassle of trying to use big screw drivers, cleaning rods, yada yada yada really aren't worth the trouble.


If you do opt to get the buttstock tool, while removing the buttstock, be sure to keep your hand over the end of the tool with slight downward pressure while you are removing the recoil tube nut lest the tool ,nut, and spring get launched into low earth orbit.

I would also recommend getting an extractor removal tool. It can be done without the tool, but again, for the money, it isn't worth the trouble. You could own and shoot that FAL for your entire lifetime and never need the extractor tool, but it is nice to have just in case.
Link Posted: 12/29/2005 12:35:40 AM EST
[Last Edit: 12/29/2005 12:36:04 AM EST by copdills]
Congrats, you could not have picked a better rifle, Have fun my friend
Link Posted: 12/30/2005 5:42:30 AM EST
FAL manual, gas wrench, stock tool, DSA scope mount are worthy canidates for you to purchase.
Top Top