Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/23/2003 12:41:46 PM EST
Hello folks.

I was trying to detail strip my Benelli M1 and I just couldn't take the cocking handle off the bolt assembly. In the manual it just says "tear it off" but I don't know how much force is needed to take it off without damaging the thing.

Any tips?
Link Posted: 7/23/2003 3:26:06 PM EST
Pull it straight out. It does need some force.
Link Posted: 7/23/2003 8:59:48 PM EST
Guy... shoot it enough and it will fall out.
Link Posted: 7/24/2003 5:54:16 AM EST
Yup, just cleaned my M1 S90 field last weekend. Bolt was a b---h to get out, but out it came after a little swearing and effort. Goes back together much easier.
Link Posted: 7/24/2003 8:33:18 AM EST
Mine is still really tough to get out by hand. I just wrap a flathead with a shop towel and give it a little pry out. It pops out VERY easily that way and does not require any force.
Link Posted: 7/24/2003 2:18:40 PM EST
I had the same problem a few months ago, and this forum came to the rescue.

The suggestion that worked best for me was to wrap a bootlace around it and pull it straight out. No prying, and no scratching.

That thing was tight!

I polished the recess area on the handle and put some CLP on the detent ball and it comes out easier, but it is still a tight fit, just smoother.
Link Posted: 7/25/2003 5:56:47 PM EST
Thanks for your help folks!

Link Posted: 7/28/2003 12:22:05 PM EST
I wrap my bootlaces (Danners for added tacticality) around it and yank...I was stupid and dinged it by yanking it out with my Leatherperson the first time....
Top Top