Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/23/2003 10:16:12 AM EST
OK the question for today is...
How does barrell lenght effect velocity in 9MM? If a round is loaded to sub-sonic speeds for a pistol with a 4" barrel, will it stay there when shot out of a 16" carbine barrel? How about a 22" barrel? Or will it gain velocity, given the longer time that the gas is acting upon it?

One last. Has anyone crono'ed this and come up with a good load? (I know this part belongs in the reloading forum but i kind of blended the topics together.)
Link Posted: 9/23/2003 10:45:14 AM EST
Generally, you will gain about 125-200fps with various 9mm loads in longer barrels. Anything over 10-12in. is not going to add much, even to +P+ loads and while I have never tried it, I would not be surprised if a 22in. barrel did not actually see a small velocity loss, especially with heavy bullets. IIRC, the Uzi / MP5 / Colt SMG's with nominal 10in or so barrel lengths usually can add about 150-175fps to standard 124gr. loads...meaning around 1300-1350 fps from NATO ball. (Been a long time since I chronographed any, though)
Link Posted: 9/23/2003 8:00:48 PM EST
I've heard that the powder is pretty much burned up in the first 6-10" of barrel. I think a 16" barrel is a flash supressor in itself, but sshhhhh....dont tell the JBT's BATF!

Check out the pistol caliber forums.
Link Posted: 9/24/2003 12:27:07 PM EST
Top Top