Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/29/2005 7:19:23 PM EST
Hey BENELLI M4 owners. Lets hear from you. Hows your M4s holding up? Any data you want to share. Like what you are feeding your M4s and if you have experienced any problems. I just got my M4 and have not even had a chance to shoot it yet. SOOOOON. Come share. CHEERS
Link Posted: 12/30/2005 11:53:05 AM EST
I have one of the limited edition Benelli M1014-marked shotguns. It's been almost 16 months since I've fired it, and it was a NIB shotgun then. I had Arfcom members at a local shoot bring every type of slug and shotshell they could scrounge up for testing, and it functioned flawlessly with everything we fed it.
Link Posted: 12/31/2005 7:20:34 AM EST
Mine's an M4, Model 11703 (much-maligned low-recoil 4-port barrel version). I went north of the 2000 round mark at the range yesterday.

There are no signs of any deformation on the bolt/bolt carrier, cracks, etc. that have been reported with some of the 11703's, especially those used with other than reduced-recoil rounds.

I've been feeding mine Federal Tactical reduced-recoil slugs and #00 buck for the most part, probably 250 - 300 rounds of Remington 3" sluggers and 3" #00 and #000 buck out of that 2000+ round total. No problems of any kind.

After each range session, I thoroughly inspect the weapon for signs of problems near the bolt carrier looking for any signs of developing problems - thus far, nothing is surfacing.
Link Posted: 1/1/2006 2:51:23 PM EST
M1014 here, as of today still new in box.
Link Posted: 1/1/2006 6:01:46 PM EST
M4 L E here. Shot the crap out of it, have the mods done at the company, shot it some more, and now it just sits. Have the collaspable stock but never installed it.
Link Posted: 1/1/2006 7:41:41 PM EST
Any of you guys interested in parting with your Benelli M4s let me know....lol

Chris
Link Posted: 1/1/2006 7:48:33 PM EST
My local gunstore has three of them sitting on the shelf and I can't afford to buy one.

Dammit
Link Posted: 1/2/2006 6:32:34 AM EST

Originally Posted By phylodog:
My local gunstore has three of them sitting on the shelf and I can't afford to buy one.

Dammit




You know Pop Guns has a layaway So there is still hope for you.
Link Posted: 1/2/2006 1:47:55 PM EST
I have nearly 8k through this critter, no hiccups or burps of any kind. 90% of the rounds have been full house sabot (Lyman 525gr.) slugs. Thus far, it has given good service.

Link Posted: 1/2/2006 2:01:00 PM EST
You know Pop Guns has a layaway So there is still hope for you.

They can't lay it far enough away for me to afford it right now.
Link Posted: 1/2/2006 2:11:42 PM EST
How much does a stock M4 sell for. I have an M1 super 90 and love it. Would like to add an M4. Thanks.
Link Posted: 1/2/2006 3:12:23 PM EST
You guys would have to make a very generous offer, but I'd part with my unfired M1014 for the right price. Let me reiterate that you'd have to make a very generous offer.
Link Posted: 1/2/2006 3:46:21 PM EST

Originally Posted By AILapua:
I have nearly 8k through this critter, no hiccups or burps of any kind. 90% of the rounds have been full house sabot (Lyman 525gr.) slugs. Thus far, it has given good service.

img.photobucket.com/albums/v81/AILapua/Dsc01157.jpg



It must be nice to live in a country that can have a full-feature Benelli M4.
Link Posted: 1/2/2006 4:31:02 PM EST
Oh, and if anyone has a regular field stock for an M4, I'd be interested in purchasing it or trading my collapsable stock for it.
Link Posted: 1/3/2006 11:50:37 AM EST
[Last Edit: 1/3/2006 11:54:02 AM EST by drone161]
Just got mine today. Been on order since 3-1-05 almost 10month wait.

Shot it about 25 rounds without a problem. I was sick so thats all i could handle with my nose,sore throat and cough.

Anyone know were I can get a mag Ext Also what sling to use

Link Posted: 1/3/2006 12:03:51 PM EST
Good luck on the magazine extension - Benelli pulled them on Nov. 2 of 2005 due to the 922(r) conflict. I've been monitoring the Benelli forum since that time, and it's been madness as these things have disappeared. One recently sold on eBay for $355...

Follow M1014's advice in this thread from the Benelli forum, and make your own sling - I did, and it works great:

www.benelliusa.com/forums/ultimatebb.php/topic/1/2191.html#000006
Link Posted: 1/3/2006 1:46:19 PM EST
[Last Edit: 1/3/2006 1:48:02 PM EST by M4Madness]

Originally Posted By AustinPSD:
Good luck on the magazine extension - Benelli pulled them on Nov. 2 of 2005 due to the 922(r) conflict. I've been monitoring the Benelli forum since that time, and it's been madness as these things have disappeared. One recently sold on eBay for $355...





I've got one still NIW that I bought right after the AW ban sunsetted.
Link Posted: 1/4/2006 4:11:14 AM EST

Originally Posted By phylodog:
My local gunstore has three of them sitting on the shelf and I can't afford to buy one.

Dammit



Name, Address and Phone number of said store, please.
Link Posted: 1/4/2006 7:09:00 AM EST
It's Pop guns in Indianapolis Indiana. Telephone number is (317) 897-8660. I was in last night and I know they had at least two left, one with & one without the collapsable.
Link Posted: 1/4/2006 6:29:22 PM EST
Special edition owner, like M4Ms. (shot his and had to have one of my own) Held up great so far. Wish I could make the stock collapse.
Link Posted: 1/17/2006 5:47:59 PM EST
Can that retractable stock work on a M1S90?

JR1572@aol.com
Link Posted: 1/17/2006 6:00:15 PM EST
No. The collapsible stock for the M4/M1017 won't work on other Benelli's.
Link Posted: 1/17/2006 8:31:37 PM EST
I must have missed this thread.
I have had my M4 for about 2 years. I have a conventional stock (no PG) on it and it shoots great.
I use it for shooting clays and pest control on the farm.

What is deal with the multi piece mag tube on your guys guns?? Does it restrict the mag capacity??
Link Posted: 1/20/2006 9:19:12 AM EST
I picked mine up about a month ago and havn't had time to really run and gun with it. BUT, at first testing I ran 100 rounds of reduced recoil OObuck Federal Tactical, 25 rounds of Winchester full power OO buck 2-3/4, and 10 rounds of Fed OOO buck 3" Magnums through it. The gun ate everything 100%. I'm very pleased with it.. I'll try and post back further range results as soon as I get it out again...
Link Posted: 1/21/2006 3:31:33 AM EST
I pick mine up next week off layaway. M4 with collaspible stock and I am stoked!!! Does the military use Eotechs or similar devices on their M4s? I would love any links to, or pics of M4's in military service.
Link Posted: 1/24/2006 6:42:27 PM EST
Oregon: Just picked up a Benelli M4 (11707) with pistol grip and collapsable stock
and 2 shot mag extension for $1565 out the door. Can't wait to shoot it.
Link Posted: 1/25/2006 12:17:18 PM EST
Link Posted: 1/25/2006 1:14:34 PM EST
M11701 = M1014 Limited Edition. This is a "replica" of the military issue M4, with a non-collapsible skeletonized stock, non-threaded barrel with fixed choke (IC)

M11703 = M4/Super 90 Standard . This is the civilian version of the M4, shipped with the OEM standard synthetic stock (no pistol grip), and a threaded barrel that accepts the full range of Benelli chokes (ships with C, IC, M). The recoil tube is machined to accept the skeletonized stock with the pistol grip accessory, but the stock will not collapse (i.e. makes the shotgun similar to the M11701.

M11707 = M4/Super 90 Standard. This is the civilian version of the M4, *current generation* that ships with the OEM standard synthetic stock, threaded barrel with 2 gas ports. The recoil tube is machined to accept the skeletonized stock with pistol grip accessory, and will allow the stock to collapse.
Link Posted: 1/25/2006 2:23:42 PM EST
Here it is, my 11707 with collaspible stock!



Link Posted: 1/25/2006 8:15:21 PM EST
My M1014 must be the bastard child, it has CHOKES!
Link Posted: 1/26/2006 3:55:36 PM EST
M4 is the Benelli model nomenclature. The numbers you see such as 11703 and 11707 are the product codes/numbers. The M4LE you refer to is actually the 11707. It is the only
one that will allow the collapsable stock to retract.
Link Posted: 1/26/2006 8:13:28 PM EST
M4LE & M1S90 w/ family



M1014

Link Posted: 1/28/2006 8:35:01 AM EST

Originally Posted By Tim84K10:
My M1014 must be the bastard child, it has CHOKES!



It is supposed to have chokes.... I believe the military model has chokes too...
Link Posted: 1/28/2006 8:43:08 AM EST

Originally Posted By MONGO45:

Originally Posted By Tim84K10:
My M1014 must be the bastard child, it has CHOKES!



It is supposed to have chokes.... I believe the military model has chokes too...



Actually, it's a long story, but the guy that hooked me up with my M4 here traded me barrels. He kept the M4 action and non choked barrel, and I got the limited edition action and choked barrel. :)
Link Posted: 1/28/2006 2:28:23 PM EST
[Last Edit: 1/28/2006 2:30:46 PM EST by selfishselfless]
Link Posted: 1/28/2006 5:11:01 PM EST

Originally Posted By MONGO45:

Originally Posted By Tim84K10:
My M1014 must be the bastard child, it has CHOKES!



It is supposed to have chokes.... I believe the military model has chokes too...



My limited edition M1014-marked shotgun does NOT have a screw-in choke.
Link Posted: 1/29/2006 6:55:40 PM EST
Here's mine (with the other M4), it's the LE 1014. I've put about 2K rounds (of almost everything) through it without a hitch. Only gripe is, I wish it would take the collapsible stock...
Top Top